[simpits-tech] Flight Link Cyclic issue....need some help
MARK COLLINS
mgcollins at comcast.net
Wed Apr 3 10:37:21 PDT 2019
Thanks Gene,
See below in red.
> On April 3, 2019 at 8:32 AM geneb <geneb at deltasoft.com mailto:geneb at deltasoft.com > wrote:
>
> > > So, for over a year (Thanks to Gene for pushing me over to the MMJOY
> > solution... ;)), I have been converting over all my old Thrustmaster
> > stuff....this TOTALLY rocks and I've been having a blast playing Elite
> > Dangerous.
> >
> > > You're welcome!
>
> > > So I separated all the wiring and started over. The Roll pot works fine.
> > No issues. The Pitch pot does not work at all.
> >
> > > If you can reach the pot, can you see if there's a cold solder joint on
> any of the leads? I'll try this later today. I THINK I can reach in with teh soldering iron and reheat and see what that does.
>
> Have you tried testing it with a voltmeter and a 9v battery? I do have a voltmeter, but don't understand what I'd do with the 9V battery. Can you help me out with that?
>
> > > i'm REALLY reluctant to take the Flight Link fully apart to get to the pot
> > because I'm afraid that I might not get it back together. What info would
> > you need to help me troubleshoot this?
> >
> > > If you're very careful and take a ton of photos of the assembly as you
> take it apart, you should be able to get it back together without much
> hassle. There are some spring loaded parts (Pitch Centering) that I'm concerned about getting back together. It's all metal inside. I'll see if I can get a Picture up. The Roll has some type of hard rubber cordage that acts as the centering device .
>
> g.
>
> --
> Proud owner of F-15C 80-0007
> http://www.f15sim.com - The only one of its kind.
> http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
> Some people collect things for a hobby. Geeks collect hobbies.
>
> ScarletDME - The red hot Data Management Environment
> A Multi-Value database for the masses, not the classes.
> http://scarlet.deltasoft.com - Get it _today_!_______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org mailto:Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.simpits.org/pipermail/simpits-tech/attachments/20190403/c72e1ccb/attachment.html>
More information about the Simpits-tech
mailing list