[simpits-tech] Flight Link Cyclic issue....need some help
geneb
geneb at deltasoft.com
Wed Apr 3 10:51:08 PDT 2019
On Wed, 3 Apr 2019, MARK COLLINS wrote:
> Thanks Gene,
>
> See below in red.
>
I don't use a client that renders HTML, so "red" has no meaning here. :)
>> >> So I separated all the wiring and started over. The Roll pot
>> >> works fine.
>>> No issues. The Pitch pot does not work at all.
>>>
>>> > If you can reach the pot, can you see if there's a cold solder
>>> > joint on
>> any of the leads?
> I'll try this later today. I THINK I can reach in with teh soldering
> iron and reheat and see what that does.
The pot may simply be dead if reflowing the joints doesn't cure the issue.
>>> > If you're very careful and take a ton of photos of the assembly
>>> > as you
>> take it apart, you should be able to get it back together without
>> much hassle.
>There are some spring loaded parts (Pitch Centering)
> that I'm concerned about getting back together. It's all metal
> inside. I'll see if I can get a Picture up. The Roll has some
> type of hard rubber cordage that acts as the centering device .
I'd be curious to see what the inside looks like - you might want to post
pics using Imgur - the list will reject anything over 40k if I remember
correctly.
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://scarlet.deltasoft.com - Get it _today_!
More information about the Simpits-tech
mailing list