[simpits-tech] Construction dilemma...

[Gene Buckle]

On Thu, 20 Nov 2008, Rick Davis wrote:

> Guys,
>
> Don't mean to jump in, but I've glanced at this stream a few times.
>
By all means Rick, do so.  That's what this list is for.

> RE Plywood:
>
> I don't know if this is any benefit to you or not, or if you're aware of it,
> but there is a product called  Bendi-Ply (the UK name - can't remember what
> they call it in N.A.) but it's easily available and not totally out of sight
> price wise. You can buy it so it bends the short way or the long way. I've
> used it making molds in the fibreglass industry and you can produce a circle
> with it less than a foot in diameter without it cracking. I used 1/4" but I
> think it comes in different thicknesses than that as well. Primarily used
> for trimming out archways and for curved counter treatments.
>

The trade name around here is Wiggle Board.  Unfortunately they don't make 
it in thicknesses less than 1/4" that I've found.

g.

-- 
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.