[simpits-tech] Wiring harness layout board...

[Gene Buckle]

> Gene,
>
> I don't have any pics handy at the moment but..... bare with my half baked "
> how to " scribble below.
>

Ben, thanks for the description.  That is really close to the method I'm 
going to use.

I'm going to get all the measurements I need and then draw the layout 
outline in AutoCAD and then plot the layout full size.  I'll then use 3M 
77 spray adhesive to glue the plot to the board that I'll build the 
harness on.

Instead of using cable ties, I'm going to use waxed lacing tape, although 
I will use the cable ties when first starting to keep everything tight. 
They'll get clipped off as I work my way down the harness.

You can expect an excruciatingly(sp!) detailed article on this once I've 
got all my research done. :)

g.



  -- 
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.