[simpits-tech] Re: Simpits-tech Digest, Vol 27, Issue 10
Alan D. Mazurka
adm.design at verizon.net
Fri Nov 11 08:19:27 PST 2005
...unless it's an optical arrangement.
At 08:32 PM 11/10/2005, you wrote:
>well if you want to get real values from your existing stick, open it up,
>probably 4 screws on the bottom. watch for springs, you should see the
>potentiometers (pot) you'll have to solder a wire to the pot correctly and
>drill an extra hole in the case to run your wire through. this could
>change the reading you get from the basic stick though. I've never tried
>to run to output off the same pot, and I've been out of electronics for a
>few years to do the math but it could work. but that's what it would take.
>_______________________________________________
>Simpits-tech mailing list
>Simpits-tech at simpits.org
>http://www.simpits.org/mailman/listinfo/simpits-tech
>To unsubscribe, please see the instructions at the bottom of the above
>page. Thanks!
----------
Alan D.
Mazurka
adm.design at verizon.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20051111/728759a1/attachment.html
More information about the Simpits-tech
mailing list