[simpits-tech] Re: Simpits-tech Digest, Vol 27, Issue 10

[cyplesma at aol.com]

ahhh yes unless it's an optical arrangement indeed.

I'm so used to seeing pots in the ones I've bought.

-----Original Message-----
From: Alan D. Mazurka <adm.design at verizon.net>
To: Simulator Cockpit tech list <simpits-tech at simpits.org>
Cc: adm.design at verizon.net
Sent: Fri, 11 Nov 2005 08:19:27 -0500
Subject: Re: [simpits-tech] Re: Simpits-tech Digest, Vol 27, Issue 10


 ...unless it's an optical arrangement.

 At 08:32 PM 11/10/2005, you wrote:
  well if you want to get real values from your existing stick, open it 
up, probably 4 screws on the bottom. watch for springs, you should see 
the potentiometers (pot) you'll have to solder a wire to the pot 
correctly and drill an extra hole in the case to run your wire through. 
this could change the reading you get from the basic stick though. I've 
never tried to run to output off the same pot, and I've been out of 
electronics for a few years to do the math but it could work. but 
that's what it would take.
 _______________________________________________
 Simpits-tech mailing list
 Simpits-tech at simpits.org
 http://www.simpits.org/mailman/listinfo/simpits-tech
  To unsubscribe, please see the instructions at the bottom of the above 
page. Thanks!

--------

 Alan D. Mazurka adm.design at verizon.net

   _______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above 
page.
Thanks!