[simpits-tech] Rotary encoder...

[RickInNoCal at aol.com]

In a message dated 3/22/04 11:40:18 AM Pacific Standard Time, 
geneb at deltasoft.com writes:

> >If you have access to a Unimat or a good drill press, you might be able to
> >just drill a 1/8" hole into the 1/4" shaft.
> >
> That would work if it were a "whole" shaft. The shaft is cut in half to
> provide keying for a knob. :(

ODWAPNM.....

looks like a mating collar's going to be the way to go then  :-(

Richard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20040322/87f6ad70/attachment.html