[simpits-tech] Rotary encoder...

[Gene Buckle]

> > I think I'll have to stick to my original plan and make a mating collar
> > out of a 1/2" acrylic rod.  I can use it to adapt 1/8" music wire to the
> > 1/4" shaft of the encoders I already have.
> >
>
> If you have access to a Unimat or a good drill press, you might be able to
> just drill a 1/8" hole into the 1/4" shaft.
>
That would work if it were a "whole" shaft. The shaft is cut in half to
provide keying for a knob. :(

g.