[simpits-tech] Rotary encoder...

[RickInNoCal at aol.com]

In a message dated 3/22/04 10:25:08 AM Pacific Standard Time, 
geneb at deltasoft.com writes:

> I think I'll have to stick to my original plan and make a mating collar
> out of a 1/2" acrylic rod.  I can use it to adapt 1/8" music wire to the
> 1/4" shaft of the encoders I already have.
> 

If you have access to a Unimat or a good drill press, you might be able to 
just drill a 1/8" hole into the 1/4" shaft.

Richard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20040322/0fc4aec8/attachment.html