[simpits-tech] Interesting stuff...

[Joseph Fagner]

>They're DE25, not -15.  The bulkhead plates will be hand fabricated.  A
>Greenlee punch for a DE25 shape is about $400.  I'm going to hand-nibble
>equivalents into thin sheet metal stock.

That's what I was driving at.  I priced those punches as well.  I don't want
one that bad.


>That's a lot of work for not much return.  You can drive all those 28V
>lamps from a Phidget or EPIC output module with ease.  FYI, don't chase
>down a 28VDC power supply - I'm using 24VDC supplies and they work really
>well.  You can get a high-amperage supply from eBay fairly cheap.  I just
>picked up a 200A 5VDC supply for less than $30 last month.


That's just it though, I can't code anything.  Guess it's time to start
learning.

Jay

_______________________________________________