[simpits-tech] Pit Update

[Albert]

Thanks for the info. Now if I can bend a rectangular metal rod into a
similar shape, then put a few screw holes on the top... with a system to
mount to the cougar base. Then "in theory" it should work out ok... I really
dont dare to "hack" up my cougar throttle.

Do you also use the cougar control panel to compensate for the additional
range of movement that you've got by theextension?

Cheers,

Al
Sydney, Australia
----- Original Message -----
From: "Frank Riedel" <frank@rezultat.dk>
To: <simpits-tech@simpits.org>
Sent: Wednesday, March 26, 2003 5:46 AM
Subject: Re: [simpits-tech] Pit Update


> I have a little blending - but that i can live with ;o)
>
> 2x4 cm
>
> the length is about 30 cm !
>
> Frank
>
> ----- Original Message -----
> From: "Albert" <shizznit@ihug.com.au>
> To: <simpits-tech@simpits.org>
> Sent: Tuesday, March 25, 2003 7:35 PM
> Subject: Re: [simpits-tech] Pit Update
>
>
> > Do you have any small "flex" or plastic blending occur when you put
force
> on
> > the TQS (when u move it up and down).
> >
> > How thick is the plastic stick?
> >
> > Al
> > Sydney, Australia
> >
> > ----- Original Message -----
> > From: "Frank Riedel" <frank@rezultat.dk>
> > To: <simpits-tech@simpits.org>
> > Sent: Wednesday, March 26, 2003 5:30 AM
> > Subject: Re: [simpits-tech] Pit Update
> >
> >
> > > Yes - the orginal side of TQS is cut at the middle...
> > > a plastic stick is put in the oven at 100 dg. it bend as butter
> > > hold it in the shape for about 1 min. and you have the extended handle
> > > mount the TQS orginal plate at each end and woula... it works just
great
> > > a little to long but absolutly a good solution !
> > >
> > > All the best
> > > Frank
> > >
> > > ----- Original Message -----
> > > From: "Albert" <shizznit@ihug.com.au>
> > > To: <simpits-tech@simpits.org>
> > > Sent: Tuesday, March 25, 2003 6:53 PM
> > > Subject: Re: [simpits-tech] Pit Update
> > >
> > >
> > > > I like the way you have extended the tqs handle. Simple, and it
looks
> > like
> > > > it work. I am thinking of doing that myself.
> > > >
> > > > Would you have some technical information that you can share with
us?
> :)
> > > >
> > > > I notice that you may have cut the original throttle's side.Is that
> > > correct?
> > > >
> > > > Cheers,
> > > >
> > > > Al
> > > > Sydney, Australia
> > > >
> > > > ----- Original Message -----
> > > > From: "Frank Riedel" <frank@rezultat.dk>
> > > > To: <simpits-tech@simpits.org>
> > > > Sent: Wednesday, March 26, 2003 4:28 AM
> > > > Subject: [simpits-tech] Pit Update
> > > >
> > > >
> > > > > Hi All !
> > > > > Things comes together... take a look !
> > > > >
> > > > > www.rezultat.dk/f16/
> > > > >
> > > > >
> > > > > Frank
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Simpits-tech mailing list
> > > > > Simpits-tech@simpits.org
> > > > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > > > To unsubscribe, please see the instructions at the bottom of the
> above
> > > > page.  Thanks!
> > > > >
> > > >
> > > > _______________________________________________
> > > > Simpits-tech mailing list
> > > > Simpits-tech@simpits.org
> > > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > > To unsubscribe, please see the instructions at the bottom of the
above
> > > page.  Thanks!
> > > >
> > >
> > > _______________________________________________
> > > Simpits-tech mailing list
> > > Simpits-tech@simpits.org
> > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > To unsubscribe, please see the instructions at the bottom of the above
> > page.  Thanks!
> > >
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!
>