[simpits-tech] Pit Update

[Frank Riedel]

There is nothing to compensate for... is there ???

Frank

----- Original Message -----
From: "Albert" <shizznit@ihug.com.au>
To: <simpits-tech@simpits.org>
Sent: Tuesday, March 25, 2003 7:51 PM
Subject: Re: [simpits-tech] Pit Update


> Thanks for the info. Now if I can bend a rectangular metal rod into a
> similar shape, then put a few screw holes on the top... with a system to
> mount to the cougar base. Then "in theory" it should work out ok... I
really
> dont dare to "hack" up my cougar throttle.
>
> Do you also use the cougar control panel to compensate for the additional
> range of movement that you've got by theextension?
>
> Cheers,
>
> Al
> Sydney, Australia
> ----- Original Message -----
> From: "Frank Riedel" <frank@rezultat.dk>
> To: <simpits-tech@simpits.org>
> Sent: Wednesday, March 26, 2003 5:46 AM
> Subject: Re: [simpits-tech] Pit Update
>
>
> > I have a little blending - but that i can live with ;o)
> >
> > 2x4 cm
> >
> > the length is about 30 cm !
> >
> > Frank
> >
> > ----- Original Message -----
> > From: "Albert" <shizznit@ihug.com.au>
> > To: <simpits-tech@simpits.org>
> > Sent: Tuesday, March 25, 2003 7:35 PM
> > Subject: Re: [simpits-tech] Pit Update
> >
> >
> > > Do you have any small "flex" or plastic blending occur when you put
> force
> > on
> > > the TQS (when u move it up and down).
> > >
> > > How thick is the plastic stick?
> > >
> > > Al
> > > Sydney, Australia
> > >
> > > ----- Original Message -----
> > > From: "Frank Riedel" <frank@rezultat.dk>
> > > To: <simpits-tech@simpits.org>
> > > Sent: Wednesday, March 26, 2003 5:30 AM
> > > Subject: Re: [simpits-tech] Pit Update
> > >
> > >
> > > > Yes - the orginal side of TQS is cut at the middle...
> > > > a plastic stick is put in the oven at 100 dg. it bend as butter
> > > > hold it in the shape for about 1 min. and you have the extended
handle
> > > > mount the TQS orginal plate at each end and woula... it works just
> great
> > > > a little to long but absolutly a good solution !
> > > >
> > > > All the best
> > > > Frank
> > > >
> > > > ----- Original Message -----
> > > > From: "Albert" <shizznit@ihug.com.au>
> > > > To: <simpits-tech@simpits.org>
> > > > Sent: Tuesday, March 25, 2003 6:53 PM
> > > > Subject: Re: [simpits-tech] Pit Update
> > > >
> > > >
> > > > > I like the way you have extended the tqs handle. Simple, and it
> looks
> > > like
> > > > > it work. I am thinking of doing that myself.
> > > > >
> > > > > Would you have some technical information that you can share with
> us?
> > :)
> > > > >
> > > > > I notice that you may have cut the original throttle's side.Is
that
> > > > correct?
> > > > >
> > > > > Cheers,
> > > > >
> > > > > Al
> > > > > Sydney, Australia
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Frank Riedel" <frank@rezultat.dk>
> > > > > To: <simpits-tech@simpits.org>
> > > > > Sent: Wednesday, March 26, 2003 4:28 AM
> > > > > Subject: [simpits-tech] Pit Update
> > > > >
> > > > >
> > > > > > Hi All !
> > > > > > Things comes together... take a look !
> > > > > >
> > > > > > www.rezultat.dk/f16/
> > > > > >
> > > > > >
> > > > > > Frank
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Simpits-tech mailing list
> > > > > > Simpits-tech@simpits.org
> > > > > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > > > > To unsubscribe, please see the instructions at the bottom of the
> > above
> > > > > page.  Thanks!
> > > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Simpits-tech mailing list
> > > > > Simpits-tech@simpits.org
> > > > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > > > To unsubscribe, please see the instructions at the bottom of the
> above
> > > > page.  Thanks!
> > > > >
> > > >
> > > > _______________________________________________
> > > > Simpits-tech mailing list
> > > > Simpits-tech@simpits.org
> > > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > > To unsubscribe, please see the instructions at the bottom of the
above
> > > page.  Thanks!
> > > >
> > >
> > > _______________________________________________
> > > Simpits-tech mailing list
> > > Simpits-tech@simpits.org
> > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > To unsubscribe, please see the instructions at the bottom of the above
> > page.  Thanks!
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
> >
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!
>