[simpits-tech] Pit Update

[Frank Riedel]

I have a little blending - but that i can live with ;o)

2x4 cm

the length is about 30 cm !

Frank

----- Original Message -----
From: "Albert" <shizznit@ihug.com.au>
To: <simpits-tech@simpits.org>
Sent: Tuesday, March 25, 2003 7:35 PM
Subject: Re: [simpits-tech] Pit Update


> Do you have any small "flex" or plastic blending occur when you put force
on
> the TQS (when u move it up and down).
>
> How thick is the plastic stick?
>
> Al
> Sydney, Australia
>
> ----- Original Message -----
> From: "Frank Riedel" <frank@rezultat.dk>
> To: <simpits-tech@simpits.org>
> Sent: Wednesday, March 26, 2003 5:30 AM
> Subject: Re: [simpits-tech] Pit Update
>
>
> > Yes - the orginal side of TQS is cut at the middle...
> > a plastic stick is put in the oven at 100 dg. it bend as butter
> > hold it in the shape for about 1 min. and you have the extended handle
> > mount the TQS orginal plate at each end and woula... it works just great
> > a little to long but absolutly a good solution !
> >
> > All the best
> > Frank
> >
> > ----- Original Message -----
> > From: "Albert" <shizznit@ihug.com.au>
> > To: <simpits-tech@simpits.org>
> > Sent: Tuesday, March 25, 2003 6:53 PM
> > Subject: Re: [simpits-tech] Pit Update
> >
> >
> > > I like the way you have extended the tqs handle. Simple, and it looks
> like
> > > it work. I am thinking of doing that myself.
> > >
> > > Would you have some technical information that you can share with us?
:)
> > >
> > > I notice that you may have cut the original throttle's side.Is that
> > correct?
> > >
> > > Cheers,
> > >
> > > Al
> > > Sydney, Australia
> > >
> > > ----- Original Message -----
> > > From: "Frank Riedel" <frank@rezultat.dk>
> > > To: <simpits-tech@simpits.org>
> > > Sent: Wednesday, March 26, 2003 4:28 AM
> > > Subject: [simpits-tech] Pit Update
> > >
> > >
> > > > Hi All !
> > > > Things comes together... take a look !
> > > >
> > > > www.rezultat.dk/f16/
> > > >
> > > >
> > > > Frank
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Simpits-tech mailing list
> > > > Simpits-tech@simpits.org
> > > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > > To unsubscribe, please see the instructions at the bottom of the
above
> > > page.  Thanks!
> > > >
> > >
> > > _______________________________________________
> > > Simpits-tech mailing list
> > > Simpits-tech@simpits.org
> > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > To unsubscribe, please see the instructions at the bottom of the above
> > page.  Thanks!
> > >
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
> >
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!