[simpits-tech] Pit Update

[Albert]

Do you have any small "flex" or plastic blending occur when you put force on
the TQS (when u move it up and down).

How thick is the plastic stick?

Al
Sydney, Australia

----- Original Message -----
From: "Frank Riedel" <frank@rezultat.dk>
To: <simpits-tech@simpits.org>
Sent: Wednesday, March 26, 2003 5:30 AM
Subject: Re: [simpits-tech] Pit Update


> Yes - the orginal side of TQS is cut at the middle...
> a plastic stick is put in the oven at 100 dg. it bend as butter
> hold it in the shape for about 1 min. and you have the extended handle
> mount the TQS orginal plate at each end and woula... it works just great
> a little to long but absolutly a good solution !
>
> All the best
> Frank
>
> ----- Original Message -----
> From: "Albert" <shizznit@ihug.com.au>
> To: <simpits-tech@simpits.org>
> Sent: Tuesday, March 25, 2003 6:53 PM
> Subject: Re: [simpits-tech] Pit Update
>
>
> > I like the way you have extended the tqs handle. Simple, and it looks
like
> > it work. I am thinking of doing that myself.
> >
> > Would you have some technical information that you can share with us? :)
> >
> > I notice that you may have cut the original throttle's side.Is that
> correct?
> >
> > Cheers,
> >
> > Al
> > Sydney, Australia
> >
> > ----- Original Message -----
> > From: "Frank Riedel" <frank@rezultat.dk>
> > To: <simpits-tech@simpits.org>
> > Sent: Wednesday, March 26, 2003 4:28 AM
> > Subject: [simpits-tech] Pit Update
> >
> >
> > > Hi All !
> > > Things comes together... take a look !
> > >
> > > www.rezultat.dk/f16/
> > >
> > >
> > > Frank
> > >
> > >
> > >
> > > _______________________________________________
> > > Simpits-tech mailing list
> > > Simpits-tech@simpits.org
> > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > To unsubscribe, please see the instructions at the bottom of the above
> > page.  Thanks!
> > >
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
> >
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!
>