[simpits-tech] Real F16 Side Stick Base Details?
Marv De Beque
simpits-tech@simpits.org
Mon, 02 Dec 2002 05:58:16 -0500
Yeah, I just replaced the whole thing with one of my own design. ;-)
Marv
On 12/1/02 11:01 PM, "Craig Rochester" <johncraigroch@msn.com> wrote:
> I just finished a test rig. I've got the Cougar's grip attached to the
> "bending beam" with one LVDT and amplifier(Pitch axis). It's all connected
> to the controller board and I took a spin in Falcon4 tonight. It feels very
> good. The travel is more than the real F-16 stick 3/4" vs. about 1/4", but
> most of the extra travel is coming from the board I've got it mounted to.
> There's so much torque, the board flexes. This thing is really going to
> have to have a very solid mount bolted to my chair.
>
> The performance in Falcon4 is not only very precise, but the increasing
> force (about 0-15 lb.) required really gives good tactile feedback for
> sensing the relative position.
>
> Now that the base is so solid, I noticed there's play between the grip and
> the shaft coming out of the grip(above the nut). Anybody worked on this
> play?
>
> Here's a link to a pic:
> http://pages.zdnet.com/johncraigrochester/sitebuildercontent/sitebuilderpict
> ures/lvdtstick4.jpg
>
> Craig R.
>
>
> -----Original Message-----
> From: simpits-tech-admin@simpits.org
[mailto:simpits-tech-admin@simpits.org]
> On Behalf Of Craig Rochester
> Sent: Saturday, November 16, 2002 5:13 PM
> To: simpits-tech@simpits.org
> Subject: RE: [simpits-tech] Real F16 Side Stick Base Details?
>
> Here's pic of the test rig:
> http://pages.zdnet.com/johncraigrochester/sitebuildercontent/sitebuilderpict
> ures/lvdt_stick.jpg
>
> -----Original Message-----
> From: simpits-tech-admin@simpits.org
[mailto:simpits-tech-admin@simpits.org]
> On Behalf Of Craig Rochester
> Sent: Saturday, November 16, 2002 4:01 PM
> To: simpits-tech@simpits.org
> Subject: [simpits-tech] Real F16 Side Stick Base Details?
>
> In an attempt to turn my Cougar into a force based stick, I've been fooling
> around with some LVDTs I bought from eBay. I've got a crude 1 axis "bending
> beam"/LVDT stick connected to my Cougar's potentiometer input. Now I have
> to design the final mod. Question:
>
> Does anyone have information about the inner works of the F-16's base? I'd
> sure like to see how the real design works before I try to reinvent the
> wheel.
>
> Thanks y'all,
>
> Craig R.
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!