[simpits-tech] curvey projects

[Chris Woodul]

Hi Jay,

Come see me at Fain before you begin your seat. I think it will be worth
your time.
PS< give me a bit of warning. I am real busy this month!
: )

Cheers,

Chris Woodul

----- Original Message -----
From: "Joseph Fagner" <crease-guard@attbi.com>
To: <simpits-tech@simpits.org>
Sent: Monday, August 26, 2002 5:59 PM
Subject: RE: [simpits-tech] curvey projects


> I love this group, lots of good ideas and thanks to all those that have
> thrown in their $0.02 (US).  I like the foam, mold and fiberglass idea
> and am mentally toying with that right now.  Roy, the bendy MDF sounds
> good, my only fear would be splitting it trying to screw it in, I think
> that would have to me glued, which wouldn't be an issue if it bends
> enough.  I could make my own bendy MDF with my table saw if I was slow
> and careful, but you really need a radial arm saw to do that evenly and
> safely.  Hmmm, may give me a reason to talk the misses into letting me
> have one.  I am going to have to build a work shop to make my pit which
> will then require a room of its own which I can use the work shop to
> build!  Ah yes , the master plan comes together ;-)
>
> Jay
>
>
>
> Message: 8
> Date: Mon, 26 Aug 2002 17:53:21 +0100 (BST)
> From: Roy Coates <roy@flightlab.liv.ac.uk>
> To: simpits-tech@simpits.org
> Subject: Re: [simpits-tech] curvey projects
> Reply-To: simpits-tech@simpits.org
>
>
>
> I've just come back from my local B&Q  (UK equivalent of a Home Depot)
> and
> had a quick look to see what flavours of MDF they stocked. The thinnest
> was 6mm which you sinmply will NOT get to bend anything like as much as
> you'd need to for a 'pit.
>
> What they dod have though was 6mm 'bendy' MDF which is just regulat MDF
> with a load of kerf cuts on one face. This stuff really does bend
> amazingly well - I had a good play in the store :)
>
> The price was about $7.50 for a 4'x2' sheet.
>
> Roy.
>
>
>
>
> --__--__--
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
>
>
> End of Simpits-tech Digest
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!
>