[simpits-tech] PCB Making and metal lettering

[Erwin Neyt]

Stig,

What color laser are you using?

Erwin.

> -----Original Message-----
> From: Stig Joergensen [mailto:stig.joergensen@clearsky.dk] 
> Sent: maandag 29 april 2002 1:26
> To: simpits-tech@simpits.org
> Subject: RE: [simpits-tech] PCB Making and metal lettering
> 
> 
> Just to report....
> 
> Im stunned - This stuff actualy works like a charm.....
> 
> But before you go out and spend all your money on glossy 
> paper i will recommend that you try with ordinary paper 
> first, atleast if you are using a color laser
> 
> My best result was with pain paper in a color laser, alltough 
> i have tried wih 3 different brands of glossy in a HP 
> LaserJet 5, and the result was not as good as with the plain 
> paper in my color printer, perhaps becuase the color printer 
> adds wax/oil to the print....
> 
> So off you go, and produce very good looking alu-panels
> 
> /Stig
> 
> -----Original Message-----
> From: Stig Joergensen 
> Sent: 28. april 2002 18:10
> To: simpits-tech@simpits.org
> Subject: [simpits-tech] PCB Making and metal lettering
> 
> 
> Hi Guys and gall.
> 
> I dude over on the electronics group just posted this link.
> 
http://www.fullnet.com/u/tomg/gooteepc.htm

I think you should go and read this..... it contains a way of making PCB's
but can be used to letter our panels as well, even in color if you have a
color laser printer.....

PS this is a long description, but well worth the 5 minutes it takes to
read.

/Stig
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks! _______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!