[simpits-tech] Construction dilemma...
Gene Buckle
geneb at deltasoft.com
Mon Nov 24 09:54:35 PST 2008
On Mon, 24 Nov 2008, Roy Coates wrote:
> On Mon, 24 Nov 2008, Gene Buckle wrote:
>
>>> Wiggle Board? HAR!! LMFAO !!
>>>
>> Didn't you use this for the cockpit you built for the Uni a few years ago?
>
> No. That used 1/2" playwood for the ribs, some regular white-wood for the
> stringers, and 4mm hardboard for the skin. (low budget, oh yes).
>
> The skin was glued to the ribs. Wood glue is amazing stuff, it never fails
> to amaze me. What I did do was lay the hardboard sheets over the pit for
> 24 hours which gave the board a nice curve - then glued them in place
> using clamps and brads to hold it while the glue set.
>
Hmmm. I'll have to look into that. The hardboard I have is just a bit
thinner than what you used. Did you set the brads and fill over the hole
afterwards?
Glue & brads would be a nice alternative to 500+ screws. :)
>
> The new sim is all welded steel - bet it breaks ;-)
>
I bet you're right. :)
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
More information about the Simpits-tech
mailing list