[simpits-tech] Construction dilemma...

[Gene Buckle]

>
> Make some kerf (cut part way through the material)cuts on the back of 
> the hardboard starting about an inch from the bend continue making cuts 
> at about quarter inch intervals until you are about an inch past the 
> bend. Then soak the hard board in water for just a moment, it will 
> become flexible. If the piece is too large to place in a pan soak some 
> cloth in water and leave them wet on the surface until the hardboard 
> begins to absorb the water. Some swelling of the material will occur.

Wet hardboard comes apart.  If it doesn't, it's still ruined because of 
the swelling that results from the wood fibers soaking up the water. :)

g.

-- 
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.