[simpits-tech] Jay's F-16...

[Joseph Fagner]

I'm having a hard time picturing what you're talking about with the skin.  Got any links to something similar that I could look at?  I mean, hell, if I can do it now, I would rather get it out of the way.
   
  Jay

Gene Buckle <geneb at deltasoft.com> wrote:
  > Yeah, I was a little intimidated by the bucking type rivets as I didn't 
> really know how to do those properly.
>
I'm hoping the EAA will add a riveting tutorial video. I've never seen a 
rivet placed from the bucking-bar side of the process.

> Skinning will be the last thing I do. I'm thinking of running the 
> strake as a permanant fixture, then making the top and bottom panels 
> into two sections each that can be removed to gain access to the inside. 
> I just haven't quite figured out how to do it yet. But I'm a ways away 
> from that.

Actually, that's pretty easy. First thing I would to is create a 
cap-strip that's 1" wide to a side that you can use to cap the edge of the 
strakes with. You can cut down a bunch of aluminum angle to make tiny 
brackets to attach the cap strip to.

>From there you can install more of the homemade L brackets and nut plates 
to allow you to use screws to attach the "upper" and "lower" skins with. 
Get yourself a rivet fan, a pile of #6 x .25" flat head screws, a micro 
stop and you're off to the races. :)

g.



-- 
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20080528/4d343452/attachment.html