[simpits-tech] Wiring harness layout board...
Ben Jones
bjones at pipecomp.com.au
Tue Sep 18 07:04:19 PDT 2007
Glad to be of assistance
Wax tape wax thread is great and really spiffy to look at when done
correctly, I did hours of it on a Experimental aircraft only to tear the
absolute Sheit out of the wax thread when pulling through the aircraft. oh
well I got better at in situ wax thread repairs after that 8-)
Ben
----- Original Message -----
From: "Gene Buckle" <geneb at deltasoft.com>
To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
Sent: Tuesday, September 18, 2007 10:41 PM
Subject: Re: [simpits-tech] Wiring harness layout board...
>> Gene,
>>
>> I don't have any pics handy at the moment but..... bare with my half
>> baked "
>> how to " scribble below.
>>
>
> Ben, thanks for the description. That is really close to the method I'm
> going to use.
>
> I'm going to get all the measurements I need and then draw the layout
> outline in AutoCAD and then plot the layout full size. I'll then use 3M
> 77 spray adhesive to glue the plot to the board that I'll build the
> harness on.
>
> Instead of using cable ties, I'm going to use waxed lacing tape, although
> I will use the cable ties when first starting to keep everything tight.
> They'll get clipped off as I work my way down the harness.
>
> You can expect an excruciatingly(sp!) detailed article on this once I've
> got all my research done. :)
>
> g.
More information about the Simpits-tech
mailing list