[simpits-tech] Cockpit builders quote....

[Scott]

IN RE COMPRESSOR SETUP.

I used to be part owner of a bedliner company that used a 3M compressed air
setup to filter and send clean air to a bypass mask to use in the spray
booth, believe me I would not HALF BUTT anything that i am sucking on...

I will get a nice schematics drawing in pdf done this weekend.... i am
currently using a TTU-529 test kit that was designed with compressed air in
mind, truthfully I did not contemplate using a SCUBA setup as there are no
refilling setups around here (Buzzard Country, Ohio)...  although now that
you have planted the seed in my brain, I do have a 1hr bottle and access to
a fire department (i volunteer here)...  you can't get much cleaner than
that... I wonder how long it would take to suck down that bottle...

Drawing and pics coming soon!

Scott


----- Original Message -----
From: "Gene Buckle" <geneb at deltasoft.com>
To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
Sent: Friday, March 23, 2007 9:28 PM
Subject: Re: [simpits-tech] Cockpit builders quote....


> > I've also found a gizmo that will supply the mbu-12 with the proper air
> > supply, being run from a properly filtered regular compressor... all i
have
> > to do is gut it out and install it into the cockpit...
> >
>
> Scott, where could I find a "proper" filter?  I've got all the correct
> connections from the oxy panel back, but I haven't found a filter system
> that will allow me to use compressor air for the system.
>
> tnx!
>
> g.
>
>  --
> "I'm not crazy, I'm plausibly off-nominal!"
>
> Proud owner of F-15C 80-0007
> http://www.f15sim.com - The only one of its kind.
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!