[simpits-tech] Anyone awake?
David C. Allen
allendc at qwest.net
Sat Jul 1 16:05:54 PDT 2006
At 02:05 PM 7/1/2006 -0500, you wrote:
>My understanding is that the transformers are wound different. Although,
>I've also been told you can run a 60Hz transformer at 400 hz but not the
>other way around. I bought a couple of transformers just for this purpose
>but never got around to testing them.
Yes the low frequency is the governing factor with the transformer so
a 60Cps should work at 400Cps
>Patience on eBay will turn up static boxes that will do 26vac 400hz. I've
>managed to snag two of them for under 200 bucks. They don't show up too
>often but when they do, they aren't cheap either.
And most are less than 1000VA. :-(
David
>Jay
>
>-----Original Message-----
>From: simpits-tech-bounces at simpits.org
>[mailto:simpits-tech-bounces at simpits.org] On Behalf Of David C. Allen
>Sent: Saturday, July 01, 2006 1:57 PM
>To: Simulator Cockpit tech list
>Subject: Re: [simpits-tech] Anyone awake?
>
>Hi Gene
>My Ham friend has a ton of them, but I would like to find a way to
>change a simple 12vdc to 110vac 60Hz Inverter to 400hz. Some say it
>is just a RC frequency component change.
>
>David
>
>
>At 11:50 AM 7/1/2006 -0700, you wrote:
> >David C. Allen wrote:
> >>Trying to find an inexpensive way to supply 28vAC 400CPS
> >Your best bet would be to find a cheap dynamotor on ebay.
> >
> >g.
> >
> >
> >_______________________________________________
> >Simpits-tech mailing list
> >Simpits-tech at simpits.org
> >http://www.simpits.org/mailman/listinfo/simpits-tech
> >To unsubscribe, please see the instructions at the bottom of the
> >above page. Thanks!
>
>_______________________________________________
>Simpits-tech mailing list
>Simpits-tech at simpits.org
>http://www.simpits.org/mailman/listinfo/simpits-tech
>To unsubscribe, please see the instructions at the bottom of the above page.
>Thanks!
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.394 / Virus Database: 268.9.8/380 - Release Date: 6/30/2006
>
>
>_______________________________________________
>Simpits-tech mailing list
>Simpits-tech at simpits.org
>http://www.simpits.org/mailman/listinfo/simpits-tech
>To unsubscribe, please see the instructions at the bottom of the
>above page. Thanks!
More information about the Simpits-tech
mailing list