[simpits-tech] throttle reverse position

[Alan D. Mazurka]

hi,

At 12:01 PM 8/7/2006, you wrote:
>Hi Justin
>Sounds like the way the 737 Thrust reversers work.
>If you use one pot then Full Reverse is 0 ohms, Idle is some percent of 
>the pot travel, and Full forward thrust is 100% pot travel.

sounds like this might be assignable within aircraft.cfg .

good news if this is so - i never went looking for it.


>Then you assign a dead band around Idle position using your analog 
>interface software or FSUIPC.
>
>David

  - adm -



----------

Alan D. 
Mazurka 
adm.design at verizon.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20060807/cd01a0ad/attachment.html