[simpits-tech] paint source

[Joseph Fagner]

Goodness, just take the proper precautions.  I've been sanding away on and
ACES and other stuff with the zinc chromate primer.  Just go buy a quality
respirator

-----Original Message-----
From: simpits-tech-bounces at simpits.org
[mailto:simpits-tech-bounces at simpits.org] On Behalf Of Bubba
Sent: Saturday, December 03, 2005 11:25 PM
To: Simulator Cockpit tech list
Subject: Re: [simpits-tech] paint source 

Justin Messenger wrote:
> I'm sure glad I didnt do the sanding I planned on!
> That is crazy! I used a paint stripper to remove the
> paint but the Zinc Chromate didnt seem to be affected.
>
>
> Now I dont know how I am going to get the smooth
> finish I need to I can repaint the damaged areas I am
> working on.  I am painting it silver no less, and that
> shows all flaws under the surface :(

Before I suggest something, make DAMN sure to check my work as I've never 
done this, only heard it suggested at the airport.

Supposedly wet sanding it is ok as long as you flood the part with water. As

in run a hose over it constantly. No dust to worry about then.
-- 
Steve
mysticz28 at swbell.net
He who seeks will find, and he who knocks will be let in.


_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.11/191 - Release Date: 12/2/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.11/191 - Release Date: 12/2/2005
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20051204/6ee5a42f/attachment.html