[simpits-tech] Using an ATX power supply

[Bubba]

Roy Coates wrote:
> ok, so you link the green wire to ground and the power supply should
> switch on.
>
> Now, I do recall that these supplies need a load in order to function
> properly. I also recall horror stories about them failing if they
> don't have a proper load on them. Truth or urban myth?
>
> Can anyone who KNOWS please share!?

Ok, found it. A momentary switch between pin 14 and ground will do it. Just 
make sure there's enough of a load on the +5v side since it's a switch mode 
PS. It shouldn't fail without a load, but may well shut down.

Note that this is ONLY for ATX PS's. Doesn't count for AT's.
-- 
Steve
mysticz28 at swbell.net
He who seeks will find, and he who knocks will be let in.