[simpits-tech] MacGayver
Marc Weigert
mail at marceting.de
Wed Jul 7 21:11:52 PDT 2004
Hey MacGyer (Fred) ;o)
Thanks alot for that thorough explanation!!!
When using these foam panels the way you descibe it
(putting them BETWEEN the ribs), I won't have fitting
problems remove them, as I would have when I put them
on top of the ribs - that's great!!!
Would you see this method to work also with this (click the link)
structure??
http://www.viperproject.info/trainerinbound.htm
I'm asking as I won't fancy to sandpaper and glue the metal frame's
ribs too much ;o)))
As for what concerns MacGyver: I'm sure I would have had 30% better
marks in school, if they wouldn't have repeated them twice a day the
months before my final examns! Thought watching it is best preparation
for my physics examns but was prooven to be totally wrong with that
assumption! ;o))
Cheers & good night,
Murdoc ehhh no... your grandfather Harry... or am I Pete Thornton???
FM> Ok, you asked for it, now I will slip into my MacGyver mode. If you do not
FM> remember the series, MacGyver work for a group and was always taking odd
FM> objects to solve problems or get away from the bad guys. My wife claims I
FM> am like him!
FM> If you are making a fighter aircraft (who is not?), you will have compound
FM> convex curves, curves in more than one direction and bowing out.
FM> The nylon net will not work unless you have a lot of support for the curving.
FM> The way I would do it is use the foam panels that are used in home built
FM> aircraft. You do not have to use the thick ones as
FM> there will be no external forces being applied. Cut the panels to fit
FM> between the ribs with excess protruding to the exterior. Glue the
FM> panels in place with something that will not attack the foam.
FM> Rough cut the foam to the approximate curves of the outer skin and flush
FM> with the ribs. Now use sandpaper on a block to smooth the curves to the
FM> proper profile. You now have a backing for fiberglass layup.
FM> From here, I would get a book from one of the aircraft homebuilder sites
FM> to take you through the proper use of resin and fiberglass. A finished skin
FM> can be sanded smooth as you wish. Really get adventurous and drill small
FM> holes and get some rivets from Ebay and resin them in before painting!
FM> Fred Mahone
FM> _______________________________________________
FM> Simpits-tech mailing list
FM> Simpits-tech at simpits.org
FM> http://www.simpits.org/mailman/listinfo/simpits-tech
FM> To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
--
Best regards,
Marc mailto:mail at marceting.de
More information about the Simpits-tech
mailing list