[simpits-tech] New file uploaded to Simpits by ChrisBrace.
Chris Brace
chris at renovo.co.nz
Tue Oct 7 16:49:47 PDT 2003
Matt,
Here in NZ there aint that many "airplane shops" to choose from. Will
probably make our own yokes since the price would be much more like what
I want to pay.
Cheers
Chris.
-----Original Message-----
From: simpits-tech-bounces at simpits.org
[mailto:simpits-tech-bounces at simpits.org] On Behalf Of Matt Bailey
Sent: Tuesday, 7 October 2003 12:39 p.m.
To: Simulator Cockpit tech list
Subject: Re: [simpits-tech] New file uploaded to Simpits by ChrisBrace.
Hey Chris, on the yokes......haven't tried running down to the local
airplane
shop, have you? :)
-Matt Bailey
On Monday 06 October 2003 06:32 am, you wrote:
> Chris, There were two really good photos on AVSIM's cockpit forum on
> a C-172 yoke built from tubing to look and act like the real thing.
> They might give you some ideas. I saved the photos to my computer.
> If you can't find them emil me and I will send them to you.
>
> John
>
>
> ----- Original Message -----
> From: "Chris Brace" <chris at renovo.co.nz>
> To: "'Simulator Cockpit tech list'" <simpits-tech at simpits.org>
> Sent: Monday, October 06, 2003 3:22 AM
> Subject: RE: [simpits-tech] New file uploaded to Simpits by
> ChrisBrace.
>
>
> Ok ok.
>
> Simkits are coming along well. They are impressive units for the price
> although I'd like to see some improvements with some of the
> construction method (like get rid of the "glue" and use small machine
> screws). We never intended to use the Simkits CCU since we are already
> developing our own code to provide "instructor" type functions for
> instruments and failures etc. So all are being driven with phidgets
> Servo boards. So far we've coded all the single simple instruments
> and they work a treat! About to start on the VOR1, VOR2 and AH. Again
> they should be simple. Ive not touched the Pifer (positional sensor)
> yet don?t quite know what the electronics are doing or what signals it
> puts out. We'll use the phidget 4/8/8 I/O to read it eventually. I
> suppose it should be easy but need to do a little research on just
> how.
>
> Im also working on the controls at present, the sim will have dual
> yokes just like the real thing with the mechanism styled on the real
> C172. Its quite a simple and effective design that should also allow
> for easy installation of control feedback should we need/want to add
> it at some stage.
>
> The panel took a long time to get right. I made two before I got it
> correct. Its 4.5mm opaque perspex sheet. All the mounting holes are
> countersunk to take 9mm machine screws, nuts and washers. Mounting is
> aluminium extrusions bought cheap at the local hardware suppiers. All
> bolted or rivetted together.
>
> The glarsheild will be much like harold's (foam core, fibreglass).
>
> In all its coming along slowly. Tell me what you want to see and I'll
> take some snaps of it. Have you got very far with the simkits
> yourself?
>
> Cheers
> Chris.
_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above
page. Thanks!
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.516 / Virus Database: 313 - Release Date: 1/09/2003
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.516 / Virus Database: 313 - Release Date: 1/09/2003
More information about the Simpits-tech
mailing list