[simpits-tech] Bendy MDF and Cheapo display (PICS)
Roy Coates
simpits-tech@simpits.org
Fri, 30 May 2003 15:31:23 +0100 (BST)
On Fri, 30 May 2003, Kevin Foisy wrote:
> Wow, it's hard to believe that the MDF is flexible enough to bend. My
> experience with MDF has been that it's quite brittle. Just try putting
> a screw in to a cross cut edge without a *really* well drilled hole and
> the stuff splits apart.
>
Heh.. been there countless times! My entire helopit console and
instrument binnacle is made from 12mm MDF and I haven't used a single nail
or screw.
HAR!
Roy.