[simpits-tech] Dzus rails

[Joseph Fagner]

See if they are cheaper the more you buy as we could perhaps get some folks
to pitch in a get a big order.  Despite having no immediate need for the
rails, I will use rails in my pit and will need to get them someday.  I
don't have a problem getting a set now to use later if someone's going to go
to the trouble to order some, I'd be glad to pitch in my share if it makes
ordering these guys easier.

Jay

-----Original Message-----
From: simpits-tech-admin@simpits.org [mailto:simpits-tech-admin@simpits.org]
On Behalf Of Ken Hallenberg
Sent: Friday, March 28, 2003 10:10 AM
To: simpits-tech@simpits.org
Subject: Re: [simpits-tech] Dzus rails

Thanks to all for the Dzus info.  Looking on the Net, it seems like lots of 
places advertise the fasteners of various types, but not too many advertise
the 
rails.  Evidently a lot of what's online caters to the race car crowd.  

I'll see what kind of quote I can get from www.edmo.com and let ya'll know. 

Quoting Ed Henderson <aircop@comcast.net>:

> I went with dzus rail mainly because you can take the panel out in 5 
> seconds if you need to get inside to fix something.  Second reason is 
> easy, instant configuration change if you want.  Third I think it just 
> looks better and after the dsuz rail is mounted the hard work is over. 
>  Everything snaps in and is properly aligned.  I was lucky and had some 
> surplus overhead Huey panels I ripped the dzus rail out of.  Other than 
> cost I can't really think of any cons to using it.  One note to save a 
> lot of headache...  get two blank panels of the correct size and mount 
> them in either end of the rail to mark, cut and install.
> 
> Not sure of price:
> http://www.edmo.com/s2/s2-25.asp
> 
> Ed
> 
> Ken Hallenberg wrote:
> 
> >Hey guys, 
> >
> >I am weighing the pros and cons of using real Dzus rails for my F16 pit
> project.
> >
> >I see on the manufacturer's website that they have several different
shapes
> and 
> >configurations.  Can  anyone tell me if I need any of the special shapes
for
> 
> >the F-16, or will just the standard flat strips handle it?
> >
> >Also if anyone knows of a good source where I can order some that would
be 
> >helpful.
> >
> >Thanks,
> >Ken 
> >
> >
> >
> >_______________________________________________
> >Simpits-tech mailing list
> >Simpits-tech@simpits.org
> >http://www.simpits.org/mailman/listinfo/simpits-tech
> >To unsubscribe, please see the instructions at the bottom of the above
page.
>  Thanks!
> >
> >  
> >
> 
> -- 
> ************************************
>       ______________________
>                 ()
>                (  )
>                /  \
>            Ed Henderson	
>         aircop@comcast.net
>          Naples, Florida
> http://mywebpages.comcast.net/hangar
> ************************************
> 
> 
> 
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page. 
> Thanks!
> 



_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!