[simpits-tech] Projector question
Höltschi Thomas
simpits-tech@simpits.org
Fri, 17 Jan 2003 08:34:17 +0100
Sean,
Do you have checked the power of the lamp?
My projector has a 120Watts OHP lamp. So I think the lamp draws about 500mA
at 240Volt.
Thomas
-----Original Message-----
From: Sean Galbraith [mailto:sean.g@paradise.net.nz]
Sent: Freitag, 17. Januar 2003 08:26
To: Simpits List
Subject: [simpits-tech] Projector question
I have been pulling my projector apart to see if there is a way of fitting
a non-standard (read "cheaper") lamp to it, as mine blew it's arse (that's
"ass" for our american-english readers) a month or so back :)
I got all the safeguards tricked, except the one which tests for a suitable
load on the lamp line..... Anyone got any idea of what sort of voltage /
current these lamps pull? I figure that if I can add a suitable load to
the line then I can fool the projector into thinking that the bulb is in
place.... Then I can add an external light source (space is not a
concern...) in an enclosure out of the top the unit (with it's own cooling
setup and power source, probably 230VAC and lots of watts...)
Any ideas suggestions (preferably not lewd and/or involving sheep or trout)
or ideas......
Sean
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!