[simpits-tech] f 16 rudder pedals
Marv De Beque
simpits-tech@simpits.org
Sun, 05 Jan 2003 14:07:58 -0500
Linear Variable Differential Transformer
On 1/5/03 12:33 PM, "Joseph Fagner" <crease-guard@attbi.com> wrote:
> Someone refresh my memory what LVDT stands for. I know both Marv and
> Craig are working with these guys and I would like to read up some on
> this since I will be getting one of these creations for my pit.
>
> Jay
>
> -----Original Message-----
> From: simpits-tech-admin@simpits.org
> [mailto:simpits-tech-admin@simpits.org] On Behalf Of funhouse24
> Sent: Sunday, January 05, 2003 10:23 AM
> To: simpits-tech@simpits.org
> Subject: Re: [simpits-tech] f 16 rudder pedals
>
> Hi Chris , that would be an option, Marv is experimenting with LVDT 's
> witch is even better. sorry you didn't win powerball, maybe next time eh
> !
> ----- Original Message -----
> From: "Chris Crowley" <ccrowley@mccrowley.com>
> To: <simpits-tech@simpits.org>
> Sent: Sunday, January 05, 2003 1:15 PM
> Subject: RE: [simpits-tech] f 16 rudder pedals
>
>
> Would Hall effect devices be an option here? They are a tad cheaper than
> those sliders are they not?
>
> Chris Crowley
>
>
>
> -----Original Message-----
> From: simpits-tech-admin@simpits.org
> [mailto:simpits-tech-admin@simpits.org]On Behalf Of Gene Buckle
> Sent: Saturday, January 04, 2003 1:41 PM
> To: simpits-tech@simpits.org
> Subject: Re: [simpits-tech] f 16 rudder pedals
>
>
> Dave, you might want to seriously consider using a rack & gear system
> with
> normal rotary pots instead of those costly sliders.
>
> g.
>
>
> On Sat, 4 Jan 2003, funhouse24 wrote:
>
>> Hello Jonas,
>> I think the cost will put most people off of
> wanting
> to
>> buy them , the linear potentiometers i used cost £135.00 each, times
> that
> by
>> 4 and you'll see what i mean . The actual materials used , HE30 TF
>> aluminium and the seamless hollow steel bar for the guide rails didn't
>> actually cost that much .I have had a couple of enquiries from the
> group
>> asking if i would start selling them, that's something i would have
> to
>> think about . my set were machined from solid bar, to make sets to
> sell i
>> would make patterns and cast my own to speed up build time . do you
> have
> any
>> photo's of the pedals you would want ? .
>> all the best
>> Dave
>> ----- Original Message -----
>> From: "Jonas Frazier" <spitpilot40@hotmail.com>
>> To: <simpits-tech@simpits.org>
>> Sent: Saturday, January 04, 2003 4:41 AM
>> Subject: Re: [simpits-tech] f 16 rudder pedals
>>
>>
>> What about some commercial airliner, 747, pedals for example? WOuld
> you
>> make a set of these for me? I'd pay you for them! Pretty please?!
>> JOnas
>>
>>
>>
>>
>>
>>
>>> From: "funhouse24" <funhouse24@supanet.com>
>>> Reply-To: simpits-tech@simpits.org
>>> To: <simpits-tech@simpits.org>
>>> Subject: Re: [simpits-tech] f 16 rudder pedals
>>> Date: Fri, 3 Jan 2003 22:08:09 -0000
>>>
>>> Hello mike ,thanks for your comments,the pedals are machined from
> aluminium
>>> , with the guide rails being made of hollow bar, I am lucky enough to
> have
>>> my own workshop and machines. the end frames took about 20 hours each
> ,the
>>> footpads about the same. the cost of materials was not that much, the
> most
>>> expensive parts being the linear potentiometers they come in at
> £135.00
>>> each,the return spring pressure on the rudder is 20 Kgf the toe
> brakes
> are
>>> 15 Kgf after talking to Martin "Pegasus" I will increase the toe
> brakes
> to
>>> 18 Kgf. I have had some enquires as to making sets, and will give it
> some
>>> thought, I would make patterns for the two frames and the foot pads
> and
>>> cast my own to speed up build time. the pedals weigh 7 Kg and work
> with
>>> the cougar set-up very well. hope this has been of some help to you,
>>> happy new year you
>>> all the best
>>> Dave
>>>
>>> Original Message -----
>>> From: Mike Williams
>>> To: simpits-tech@simpits.org
>>> Sent: Friday, January 03, 2003 8:14 PM
>>> Subject: RE: [simpits-tech] f 16 rudder pedals
>>>
>>>
>>> Those are very nice looking pedals Dave, can you tell us how you
> made
>>> them, its evident you have access to a machine shop, any thought of
> making
>>> these for others?
>>> -----Original Message-----
>>> From: simpits-tech-admin@simpits.org
>>> [mailto:simpits-tech-admin@simpits.org]On Behalf Of funhouse24
>>> Sent: Friday, January 03, 2003 2:38 PM
>>> To: simpits-tech@simpits.org
>>> Subject: Re: [simpits-tech] f 16 rudder pedals
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: funhouse24
>>> To: simpits-tech@simpits.org
>>> Sent: Friday, January 03, 2003 5:05 PM
>>> Subject: Re: [simpits-tech] f 16 rudder pedals
>>>
>>>
>>> Hi Chris, the pic's have now been uploaded, and can be seen at
>>> www.simpits.org/fileproc/allfiles.php hope you like them
>>>
>>> all the best Dave
>>> ----- Original Message -----
>>> From: Chris Crowley
>>> To: simpits-tech@simpits.org
>>> Sent: Friday, January 03, 2003 2:06 AM
>>> Subject: RE: [simpits-tech] f 16 rudder pedals
>>>
>>>
>>> Uploaded where? Can you give a link?
>>>
>>> Chris Crowley
>>>
>>> -----Original Message-----
>>> From: simpits-tech-admin@simpits.org
>>> [mailto:simpits-tech-admin@simpits.org]On Behalf Of funhouse24
>>> Sent: Thursday, January 02, 2003 1:18 PM
>>> To: simpits-tech@simpits.org
>>> Subject: [simpits-tech] f 16 rudder pedals
>>>
>>>
>>> Hi guy's
>>> Happy New Year to all,
>>> I have just finished making a set of rudder pedals for my
> pit
>>> and have uploaded a couple of pic's if anyone's interested.
> Dimensionally
>>> they be slightly incorrect as they were scaled from a couple of
> photo's,
>>>
>>> all the best
>>> Dave
>>
>>
>> _________________________________________________________________
>> Protect your PC - get McAfee.com VirusScan Online
>> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>>
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech@simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
> page.
>> Thanks!
>>
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech@simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
>>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page.
> Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!