[simpits-tech] f 16 rudder pedals
Gene Buckle
simpits-tech@simpits.org
Sun, 5 Jan 2003 10:29:10 -0800 (PST)
Yes, those would work as well.
g.
On Sun, 5 Jan 2003, Chris Crowley wrote:
> Would Hall effect devices be an option here? They are a tad cheaper than
> those sliders are they not?
>
> Chris Crowley
>
>
>
> -----Original Message-----
> From: simpits-tech-admin@simpits.org
> [mailto:simpits-tech-admin@simpits.org]On Behalf Of Gene Buckle
> Sent: Saturday, January 04, 2003 1:41 PM
> To: simpits-tech@simpits.org
> Subject: Re: [simpits-tech] f 16 rudder pedals
>
>
> Dave, you might want to seriously consider using a rack & gear system with
> normal rotary pots instead of those costly sliders.
>
> g.
>
>
> On Sat, 4 Jan 2003, funhouse24 wrote:
>
> > Hello Jonas,
> > I think the cost will put most people off of wanting
> to
> > buy them , the linear potentiometers i used cost £135.00 each, times that
> by
> > 4 and you'll see what i mean . The actual materials used , HE30 TF
> > aluminium and the seamless hollow steel bar for the guide rails didn't
> > actually cost that much .I have had a couple of enquiries from the group
> > asking if i would start selling them, that's something i would have to
> > think about . my set were machined from solid bar, to make sets to sell i
> > would make patterns and cast my own to speed up build time . do you have
> any
> > photo's of the pedals you would want ? .
> > all the best
> > Dave
> > ----- Original Message -----
> > From: "Jonas Frazier" <spitpilot40@hotmail.com>
> > To: <simpits-tech@simpits.org>
> > Sent: Saturday, January 04, 2003 4:41 AM
> > Subject: Re: [simpits-tech] f 16 rudder pedals
> >
> >
> > What about some commercial airliner, 747, pedals for example? WOuld you
> > make a set of these for me? I'd pay you for them! Pretty please?!
> > JOnas
> >
> >
> >
> >
> >
> >
> > >From: "funhouse24" <funhouse24@supanet.com>
> > >Reply-To: simpits-tech@simpits.org
> > >To: <simpits-tech@simpits.org>
> > >Subject: Re: [simpits-tech] f 16 rudder pedals
> > >Date: Fri, 3 Jan 2003 22:08:09 -0000
> > >
> > >Hello mike ,thanks for your comments,the pedals are machined from
> aluminium
> > >, with the guide rails being made of hollow bar, I am lucky enough to
> have
> > >my own workshop and machines. the end frames took about 20 hours each
> ,the
> > >footpads about the same. the cost of materials was not that much, the
> most
> > >expensive parts being the linear potentiometers they come in at £135.00
> > >each,the return spring pressure on the rudder is 20 Kgf the toe brakes
> are
> > >15 Kgf after talking to Martin "Pegasus" I will increase the toe brakes
> to
> > >18 Kgf. I have had some enquires as to making sets, and will give it some
> > >thought, I would make patterns for the two frames and the foot pads and
> > >cast my own to speed up build time. the pedals weigh 7 Kg and work with
> > >the cougar set-up very well. hope this has been of some help to you,
> > >happy new year you
> > >all the best
> > >Dave
> > >
> > > Original Message -----
> > > From: Mike Williams
> > > To: simpits-tech@simpits.org
> > > Sent: Friday, January 03, 2003 8:14 PM
> > > Subject: RE: [simpits-tech] f 16 rudder pedals
> > >
> > >
> > > Those are very nice looking pedals Dave, can you tell us how you made
> > >them, its evident you have access to a machine shop, any thought of
> making
> > >these for others?
> > > -----Original Message-----
> > > From: simpits-tech-admin@simpits.org
> > >[mailto:simpits-tech-admin@simpits.org]On Behalf Of funhouse24
> > > Sent: Friday, January 03, 2003 2:38 PM
> > > To: simpits-tech@simpits.org
> > > Subject: Re: [simpits-tech] f 16 rudder pedals
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: funhouse24
> > > To: simpits-tech@simpits.org
> > > Sent: Friday, January 03, 2003 5:05 PM
> > > Subject: Re: [simpits-tech] f 16 rudder pedals
> > >
> > >
> > > Hi Chris, the pic's have now been uploaded, and can be seen at
> > > www.simpits.org/fileproc/allfiles.php hope you like them
> > >
> > > all the best Dave
> > > ----- Original Message -----
> > > From: Chris Crowley
> > > To: simpits-tech@simpits.org
> > > Sent: Friday, January 03, 2003 2:06 AM
> > > Subject: RE: [simpits-tech] f 16 rudder pedals
> > >
> > >
> > > Uploaded where? Can you give a link?
> > >
> > > Chris Crowley
> > >
> > > -----Original Message-----
> > > From: simpits-tech-admin@simpits.org
> > >[mailto:simpits-tech-admin@simpits.org]On Behalf Of funhouse24
> > > Sent: Thursday, January 02, 2003 1:18 PM
> > > To: simpits-tech@simpits.org
> > > Subject: [simpits-tech] f 16 rudder pedals
> > >
> > >
> > > Hi guy's
> > > Happy New Year to all,
> > > I have just finished making a set of rudder pedals for my pit
> > >and have uploaded a couple of pic's if anyone's interested. Dimensionally
> > >they be slightly incorrect as they were scaled from a couple of photo's,
> > >
> > > all the best
> > > Dave
> >
> >
> > _________________________________________________________________
> > Protect your PC - get McAfee.com VirusScan Online
> > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page.
> > Thanks!
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
> >
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
>