[simpits-tech] Now I'm lost.
RickInNoCal at aol.com
RickInNoCal at aol.com
Tue Dec 30 13:23:21 PST 2003
In a message dated 12/30/03 2:36:57 AM Pacific Standard Time,
mysticz28 at swbell.net writes:
> Came up with an idea that might work to replace rotary encoders with
> something that works the same, but outputs entirely different keypresses on
> either side
There's switches that do just that already on the market. There's one made by
Knitter Switch, in Germany, that costs about $3 each, or a somewhat more
expensive version by Alps for about $5 per. Both send a single pulse across pins
A-B if turned one way and across pins B-C if turned the other.
My pit uses Knitter switches. They're not 100% what I wanted, to be honest.
If you turn them too fast, the contacts skip and you miss pulses. At some point
I'm going to buy a couple of the Alps switches and see if they're better.
Richard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20031230/33109470/attachment.html
More information about the Simpits-tech
mailing list