[simpits-tech] F-16 Front panel (MFD, RWR console)angle

[Chris Crowley]

Marv,
Thanks. I have the console itself at 90 to the rudder floor and you've
helped me by clarifying that the angle of the main panels is 15 degrees
towards the nose in the vertical (which I thought was 10).  I take it the
panels are at 90 with respect to the center console and aren't angled
towards the pilot as you go from the inside (where the MFD is) to the edge
(where the analog gauge housing is - right hand side).

Chris

-----Original Message-----
From: Marv De Beque [mailto:mdebeque at woh.rr.com]
Sent: Wednesday, December 10, 2003 6:45 AM
To: Simulator Cockpit tech list
Subject: Re: RE : [simpits-tech] F-16 Front panel (MFD, RWR console)angle

Not quite.

The back edge of the real center console is 90 degrees (vertical) in
relation to the floor pan (where rudders mount).  The floor pan is 0 degrees
or your reference point.

The front console leans forward 15 degrees from vertical (i.e., 75 degrees)
toward the nose of the aircraft as referenced from the floor pan.

I am going to buy one of those expensive digital protractors this week and
hop over to Dayton's F-16A simulator and grab some angles as referenced from
the floor pan.  I'll share those next week.

Marv


On 12/10/03 5:35 AM, "Chris Crowley" <ccrowley at mccrowley.com> wrote:

> Hello everyone and Happy Holidays!
>
> Does this mean that the main panels are 15 degrees with respect to the
> center console rather than being mounted perpendicular to it, and that
they
> are also canted 10 degrees backwards rather than being vertical?  There
are
> two planes to consider here and I didn't want to get them mixed up. I have
> had previous discussions with respect to the 10 degrees off vertical, but
> had not inquired about the angle to the center console.
>
> Chris
> -----Original Message-----
> From: Jean-Yves SURFIN' [mailto:surfer.man at wanadoo.fr]
> Sent: Sunday, December 07, 2003 4:58 AM
> To: 'Simulator Cockpit tech list'
> Subject: RE : [simpits-tech] F-16 Front panel (MFD, RWR console) angle
>
> Thanks Marv !
>
>
>
>
>
>
> Capitaine Jean-Yves "Surfin'" Jouanny
> 101e ECV-FAF / France1 : Cougar Knights
>
> 101e ECV-QAF http://www.quebecairforce.com
> 101e ECV- FAF http://perso.wanadoo.fr/franceairforce
>
>
> -----Message d'origine-----
> De : simpits-tech-bounces at simpits.org
> [mailto:simpits-tech-bounces at simpits.org] De la part de Marv De Beque
> Envoyé : samedi 6 décembre 2003 16:04
> À : Simulator Cockpit tech list
> Objet : Re: [simpits-tech] F-16 Front panel (MFD, RWR console) angle
>
> 15 degrees.
>
> On 12/1/03 6:38 PM, "Jean-Yves SURFIN'" <surfer.man at wanadoo.fr> wrote:
>
>> Hi
>>
>> Is there anybody knows what is  F-16 Front panel (MFD, RWR console) 's
>> angle between this console and the middle console  ?
>>
>> I think it's around 18 or 20 °
>>
>> Could you confirm the right one ?
>>
>> Best regards
>> J-Yves
>>
>>
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech at simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
> page.
>> Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.
> Thanks!