[simpits-tech] RE: F-16 knobs (Marv - got yer ears on?)

[Marv De Beque]

I'd have to check those numbers, but you're getting warm.  Seems that you
have more different types than what I found, but that could be the
difference in Block versions.
-- 


> From: "Chris Crowley" <ccrowley@mccrowley.com>
> Reply-To: simpits-tech@simpits.org
> Date: Thu, 26 Sep 2002 05:30:05 -0400
> To: <simpits-tech@simpits.org>
> Subject: RE: [simpits-tech] RE: F-16 knobs (Marv - got yer ears on?)
> 
> Korry is the OEM. They have a 37 dollar setup, but want more for their
> knobs. Roughly the same total.
> 
> LOCKHEED PN KORRY PN QTY PRICE  SETUP CHARGE
> 16F0208     7 unable to x-reference 1
> C10761-1 GP480-A1G2 2 19.41 38.82 37.00
> C10927-2 TT153-A1G2 1 18.05 18.05 27.00
> C10928-2 TT156-A1G1  1 18.95 18.95 27.00
> C10928-3 TT376-102 1 20.93 20.93 37.00
> C10929-2 TT150-A1G1 1 18.95 18.95 27.00
> C10929-3 TT370-105 1 20.93 20.93 37.00
> C10930-1 RD241-A1G2  2 18.05 36.10 27.00
> C9573-1 RD462-101 1 17.61 17.61 37.00
> C9574-1 TT151-101  1 16.13 16.13 37.00
> C9575-1 GP361-101 1 21.44 21.44 37.00
> C9576-1 BP247-101 1 15.89 15.89 37.00
> C9576-3 SA384-101 1 20.99 20.99 37.00
> C9576-6 SA384-104 1 26.33 26.33 47.00
> C9576-7 SA384-109  2 26.34 52.68 47.00
> C9578-1 RD240-101 3 16.04 48.12 37.00
> C9579-1 RD385-A1G3 1 17.84 17.84 27.00
> C9579-3 RD385-103 2 20.15 40.30 37.00
> C9580-1 BP325-101 1 15.89 15.89 37.00
> C9580-2 unable to x-reference 1  0.00
> MS21385-02GNW TT155-125 1 20.27 20.27 37.00
> MS21385-02HNW TT156-101 1 20.27 20.27 37.00
> MS21385-04BNW TT150-106 1 18.05 18.05 37.00
> MS21385-04ENW TT151-115 1 19.31 19.31 37.00
> MS21385-04HNW TT156-107  1 19.29 19.29 37.00
> SUB-TOTAL 563.14 821.00
> TOTAL  1,384.14
> 
> Chris Crowley
> 
> 
> -----Original Message-----
> From: simpits-tech-admin@simpits.org
> [mailto:simpits-tech-admin@simpits.org]On Behalf Of Steve Wilson
> Sent: Wednesday, September 25, 2002 1:05 PM
> To: simpits-tech@simpits.org
> Subject: [simpits-tech] RE: F-16 knobs (Marv - got yer ears on?)
> 
> 
> 
> 
> (Sorry about the HTML mess, folks...)
> 
> Ack!!  Frank - that's obscene.  When I said I wanted a US made part -
> I didn't mean that it had to be from the OEM!!   OUTSTANDING link,
> though.  Fun how you can poke 'round their site and get good pix and
> even cross-sectional diagrams of the knobs.....
> 
> MARV:  I can probably snoop around and get all the info I need to
> generate knobs in 3D space - using Rhino3D.  This little gem can
> export to CAD, DXF, OBJ, etc.....  If you had good 3D data, would
> that help your knob project?
> 
> Steve
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!