[simpits-tech] F16 panels mounting

[Marv De Beque]

You can always apply black sticky tape on the bottom seams.  ;-)
-- 


> From: "Albert Yung" <shizznit@ihug.com.au>
> Reply-To: simpits-tech@simpits.org
> Date: Sun, 22 Oct 2000 09:57:30 +1000
> To: <simpits-tech@simpits.org>
> Subject: Re: [simpits-tech] F16 panels mounting
> 
> Thanks Ben, Marv and Steve for the reply,
> 
> a 2 mm gap sounds right. I suppose the tiny gap Marv mentioned is a good way
> to judge. The only issue is if I cut out the panel and leave a tiny gap for
> the paper to slip through, light sources which I will use beneath the panels
> itself will also come through. I suppose in the real thing that does not
> happen due to the fact that the panels are backlidded differently?
> 
> I have decided to experiment with a couple of low power/ low heat light bulbs.
> Similar concept to a light table. "Huston, we might have a problem" :) let me
> have another think before I start chopping away.
> 
> Cheers,
> 
> Albert
> Sydney, Oztralia
> 
> 
> ----- Original Message -----
> From: Newsletter2BS
> To: simpits-tech@simpits.org
> Sent: Tuesday, October 22, 2002 5:30 AM
> Subject: AW: [simpits-tech] F16 panels mounting
> 
> 
> Hello Albert,
> 
> I can't confirm your question for sure, but I checked all my pictures I have
> from the Viper-pit and all this stuff are showing small gap between the
> left-side panels (horizontally and vertically) - I considered the distances
> with 2mm within my drawings.
> 
> Greetings
> 
> Ben "Interceptor" Schup
> BAVARIAN WILDCATS 401th VFS
> -----Ursprüngliche Nachricht-----
> Von: simpits-tech-admin@simpits.org [mailto:simpits-tech-admin@simpits.org]Im
> Auftrag von Albert Yung
> Gesendet: Samstag, 21. Oktober 2000 20:02
> An: simpits-tech@simpits.org
> Betreff: [simpits-tech] F16 panels mounting
> 
> 
> Hi all F16 pitters,
> 
> I run into a small problem...or rather a small question mark in my head
> tonight.
> 
> The left side panel in the pit...each "individual" black panels for all the
> switches and knobs...are they mounted "edge to edge" next to each other? or do
> they have a "small" gap inbetween?
> 
> Cos' from the photo resources i have seen.They do appears to. However, in a
> black and white plan (that 2mb BMP file) it looked as if they had a small
> space inbetween them.
> 
> Can anyone verify that?
> 
> Many thanks.
> 
> Albert
> Sydney, Austraila
> 
>