[simpits-tech] Stepper motor controll ....sorta O/T

Ben Jones simpits-tech@simpits.org
Thu, 2 May 2002 20:15:40 +0800


I do  a bit of formation flying  occasionally on weekends  with my girlfriend and another couple,
what i want to do is tape our flying sessions on a "Handicam"  to view later blah  blah...

  i want to mount the handi cam  on a remote controlled movable mount  , so i can mount a togle switch on the controll collum and move the camera depending on the position i am flying in  eg line aster, left/right echelon , or a interior shot ,

i am going to use a servo motor found in a radio controlled aircraft , what can i build to controll the servo motor from a toggle switch left righ or center , must be simple cheap and run off a 12vdc power supply ,

the design on the mechanical system has been  done and is just about made ,  just the buts between the switch and the servo are confusing me ?

thanks in advance
 



BEN   JONES 
-----------------------------------------
bjones@pipecomp.com.au
------------------------------------------------