[simpits-tech] ftp site...
Gene Buckle
simpits-tech@simpits.org
Tue, 18 Jun 2002 13:28:04 -0700 (PDT)
I don't know the widths of the F-16 panels. In the F-15, the consoles are
split into two rows. The outer row is 4.75 wide and the inner row is 5.75
wide.
g.
On Tue, 18 Jun 2002, Marv De Beque wrote:
> I know that they are 0.375" on center, but I don't remember the widths
> between rails. Gene would know.
> --
>
>
> > From: "Ido Dekkers" <idekkers@clicksoftware.com>
> > Reply-To: simpits-tech@simpits.org
> > Date: Tue, 18 Jun 2002 14:10:23 +0300
> > To: simpits-tech@simpits.org
> > Subject: Re: [simpits-tech] ftp site...
> >
> >
> > what about the places were the screws are ?
> >
> >
> >
> > Marv De Beque
> > <mdebeque@woh.r
> > r.com> To
> > Sent by: <simpits-tech@simpits.org>
> > simpits-tech-ad cc
> > min@simpits.org
> > bcc
> >
> > 06/18/2002 Subject
> > 01:47 PM Re: [simpits-tech] ftp site...
> >
> >
> > Please respond
> > to simpits-tech
> >
> >
> >
> >
> >
> >
> > They seem to vary, but 0.050" seems to be the difference between the edge
> > of
> > the light plate and the back plate edge.
> >
> > That is, the back plate has a porch of about 0.050" all the way around.
> > --
> >
> >
> >> From: "Biggles" <r.koopman0@chello.nl>
> >> Reply-To: simpits-tech@simpits.org
> >> Date: Tue, 18 Jun 2002 08:08:15 +0200
> >> To: <simpits-tech@simpits.org>
> >> Subject: Re: [simpits-tech] ftp site...
> >>
> >> Then i only have to say : Good job on working out the panels.
> >> Was just trying to be helpfull and not correcting.
> >> Might even use some of the panels that you provided :)
> >>
> >> Biggles.
> >>
> >> (P.s. Ido you might have a good point, Is it the backplate or the front
> >> plate size.
> >> Does one know what is the know difference is about the front/backplate
> > size?
> >> Mil spec wise that is.
> >>
> >>
> >>
> >> ----- Original Message -----
> >> From: "Gwen de Lucero" <gdelucer@columbus.rr.com>
> >> To: <simpits-tech@simpits.org>
> >> Sent: Tuesday, June 18, 2002 5:51 AM
> >> Subject: Re: [simpits-tech] ftp site...
> >>
> >>
> >>> Biggles,
> >>>
> >>> Yes the images are 100% actual size. Of course you will get a slight
> >>> variation in size when you print depending on how accurate the printer
> > you
> >>> are using is but that should be pretty much negligible.
> >>>
> >>> ----- Original Message -----
> >>> From: "Biggles" <r.koopman0@chello.nl>
> >>> To: <simpits-tech@simpits.org>
> >>> Sent: Monday, June 17, 2002 11:29 PM
> >>> Subject: Re: [simpits-tech] ftp site...
> >>>
> >>>
> >>>> Gwen,
> >>>>
> >>>> Just wanne add some to your input:
> >>>> Those files look real good.
> >>>> But my question is: are they the real size?
> >>>> I am not in the possition to find out as i am not having a printer.
> >>>> I can send you some scanned front sides of some of the panels.
> >>>> By this you can check the ones you got with some of the panels scanned
> >> at
> >>>> real size.
> >>>>
> >>>> I am asking this because i ran into alot of picktures that wheren't the
> >>> real
> >>>> size.
> >>>> Not that this is a real problem. Juist nice (need) to know.
> >>>>
> >>>> Just trying to add some to your imput.
> >>>>
> >>>> Biggles.
> >>>>
> >>>> ----- Original Message -----
> >>>> From: "Gwen de Lucero" <gdelucer@columbus.rr.com>
> >>>> To: <simpits-tech@simpits.org>
> >>>> Sent: Monday, June 17, 2002 11:58 PM
> >>>> Subject: Re: [simpits-tech] ftp site...
> >>>>
> >>>>
> >>>>> Thanks again Gene.
> >>>>>
> >>>>> I didn't realize bandwidth was that bad an issue for the site. Sorry
> >> if
> >>>> I'm
> >>>>> making things tougher.
> >>>>>
> >>>>> If you'd like I could put up 11 separate files... one for each page of
> >>>> panel
> >>>>> graphics.
> >>>>>
> >>>>>
> >>>>> ----- Original Message -----
> >>>>> From: "Gene Buckle" <geneb@deltasoft.com>
> >>>>> To: <simpits-tech@simpits.org>
> >>>>> Sent: Monday, June 17, 2002 5:49 PM
> >>>>> Subject: [simpits-tech] ftp site...
> >>>>>
> >>>>>
> >>>>>> Ok, the ftp site is back up - at least until the next script kiddie
> >>>> finds
> >>>>>> a new exploit. *sigh*
> >>>>>>
> >>>>>> This means that Gwen's stuff is online. If you don't have PhotoShop
> >>> or
> >>>> a
> >>>>>> tool to read PSD files, please don't download it. You won't be able
> >>> to
> >>>>>> read them anyway. :)
> >>>>>>
> >>>>>> The file is big (10+MB) and I beg that you guys don't mug my poor
> >>>> internet
> >>>>>> connection. Go easy on me. :)
> >>>>>>
> >>>>>> g.
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Simpits-tech mailing list
> >>>>>> Simpits-tech@simpits.org
> >>>>>> http://www.simpits.org/mailman/listinfo/simpits-tech
> >>>>>> To unsubscribe, please see the instructions at the bottom of the
> >> above
> >>>>> page. Thanks!
> >>>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Simpits-tech mailing list
> >>>>> Simpits-tech@simpits.org
> >>>>> http://www.simpits.org/mailman/listinfo/simpits-tech
> >>>>> To unsubscribe, please see the instructions at the bottom of the above
> >>>> page. Thanks!
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Simpits-tech mailing list
> >>>> Simpits-tech@simpits.org
> >>>> http://www.simpits.org/mailman/listinfo/simpits-tech
> >>>> To unsubscribe, please see the instructions at the bottom of the above
> >>> page. Thanks!
> >>>>
> >>>
> >>> _______________________________________________
> >>> Simpits-tech mailing list
> >>> Simpits-tech@simpits.org
> >>> http://www.simpits.org/mailman/listinfo/simpits-tech
> >>> To unsubscribe, please see the instructions at the bottom of the above
> >> page. Thanks!
> >>>
> >>>
> >>
> >>
> >>
> >> _______________________________________________
> >> Simpits-tech mailing list
> >> Simpits-tech@simpits.org
> >> http://www.simpits.org/mailman/listinfo/simpits-tech
> >> To unsubscribe, please see the instructions at the bottom of the above
> > page.
> >> Thanks!
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> > page. Thanks!
> >
> >
> >
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above page.
> > Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
>