[simpits-tech] ftp site...
Marv De Beque
simpits-tech@simpits.org
Tue, 18 Jun 2002 12:24:51 -0400
I know that they are 0.375" on center, but I don't remember the widths
between rails. Gene would know.
--
> From: "Ido Dekkers" <idekkers@clicksoftware.com>
> Reply-To: simpits-tech@simpits.org
> Date: Tue, 18 Jun 2002 14:10:23 +0300
> To: simpits-tech@simpits.org
> Subject: Re: [simpits-tech] ftp site...
>
>
> what about the places were the screws are ?
>
>
>
> Marv De Beque
> <mdebeque@woh.r
> r.com> To
> Sent by: <simpits-tech@simpits.org>
> simpits-tech-ad cc
> min@simpits.org
> bcc
>
> 06/18/2002 Subject
> 01:47 PM Re: [simpits-tech] ftp site...
>
>
> Please respond
> to simpits-tech
>
>
>
>
>
>
> They seem to vary, but 0.050" seems to be the difference between the edge
> of
> the light plate and the back plate edge.
>
> That is, the back plate has a porch of about 0.050" all the way around.
> --
>
>
>> From: "Biggles" <r.koopman0@chello.nl>
>> Reply-To: simpits-tech@simpits.org
>> Date: Tue, 18 Jun 2002 08:08:15 +0200
>> To: <simpits-tech@simpits.org>
>> Subject: Re: [simpits-tech] ftp site...
>>
>> Then i only have to say : Good job on working out the panels.
>> Was just trying to be helpfull and not correcting.
>> Might even use some of the panels that you provided :)
>>
>> Biggles.
>>
>> (P.s. Ido you might have a good point, Is it the backplate or the front
>> plate size.
>> Does one know what is the know difference is about the front/backplate
> size?
>> Mil spec wise that is.
>>
>>
>>
>> ----- Original Message -----
>> From: "Gwen de Lucero" <gdelucer@columbus.rr.com>
>> To: <simpits-tech@simpits.org>
>> Sent: Tuesday, June 18, 2002 5:51 AM
>> Subject: Re: [simpits-tech] ftp site...
>>
>>
>>> Biggles,
>>>
>>> Yes the images are 100% actual size. Of course you will get a slight
>>> variation in size when you print depending on how accurate the printer
> you
>>> are using is but that should be pretty much negligible.
>>>
>>> ----- Original Message -----
>>> From: "Biggles" <r.koopman0@chello.nl>
>>> To: <simpits-tech@simpits.org>
>>> Sent: Monday, June 17, 2002 11:29 PM
>>> Subject: Re: [simpits-tech] ftp site...
>>>
>>>
>>>> Gwen,
>>>>
>>>> Just wanne add some to your input:
>>>> Those files look real good.
>>>> But my question is: are they the real size?
>>>> I am not in the possition to find out as i am not having a printer.
>>>> I can send you some scanned front sides of some of the panels.
>>>> By this you can check the ones you got with some of the panels scanned
>> at
>>>> real size.
>>>>
>>>> I am asking this because i ran into alot of picktures that wheren't the
>>> real
>>>> size.
>>>> Not that this is a real problem. Juist nice (need) to know.
>>>>
>>>> Just trying to add some to your imput.
>>>>
>>>> Biggles.
>>>>
>>>> ----- Original Message -----
>>>> From: "Gwen de Lucero" <gdelucer@columbus.rr.com>
>>>> To: <simpits-tech@simpits.org>
>>>> Sent: Monday, June 17, 2002 11:58 PM
>>>> Subject: Re: [simpits-tech] ftp site...
>>>>
>>>>
>>>>> Thanks again Gene.
>>>>>
>>>>> I didn't realize bandwidth was that bad an issue for the site. Sorry
>> if
>>>> I'm
>>>>> making things tougher.
>>>>>
>>>>> If you'd like I could put up 11 separate files... one for each page of
>>>> panel
>>>>> graphics.
>>>>>
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Gene Buckle" <geneb@deltasoft.com>
>>>>> To: <simpits-tech@simpits.org>
>>>>> Sent: Monday, June 17, 2002 5:49 PM
>>>>> Subject: [simpits-tech] ftp site...
>>>>>
>>>>>
>>>>>> Ok, the ftp site is back up - at least until the next script kiddie
>>>> finds
>>>>>> a new exploit. *sigh*
>>>>>>
>>>>>> This means that Gwen's stuff is online. If you don't have PhotoShop
>>> or
>>>> a
>>>>>> tool to read PSD files, please don't download it. You won't be able
>>> to
>>>>>> read them anyway. :)
>>>>>>
>>>>>> The file is big (10+MB) and I beg that you guys don't mug my poor
>>>> internet
>>>>>> connection. Go easy on me. :)
>>>>>>
>>>>>> g.
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Simpits-tech mailing list
>>>>>> Simpits-tech@simpits.org
>>>>>> http://www.simpits.org/mailman/listinfo/simpits-tech
>>>>>> To unsubscribe, please see the instructions at the bottom of the
>> above
>>>>> page. Thanks!
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Simpits-tech mailing list
>>>>> Simpits-tech@simpits.org
>>>>> http://www.simpits.org/mailman/listinfo/simpits-tech
>>>>> To unsubscribe, please see the instructions at the bottom of the above
>>>> page. Thanks!
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Simpits-tech mailing list
>>>> Simpits-tech@simpits.org
>>>> http://www.simpits.org/mailman/listinfo/simpits-tech
>>>> To unsubscribe, please see the instructions at the bottom of the above
>>> page. Thanks!
>>>>
>>>
>>> _______________________________________________
>>> Simpits-tech mailing list
>>> Simpits-tech@simpits.org
>>> http://www.simpits.org/mailman/listinfo/simpits-tech
>>> To unsubscribe, please see the instructions at the bottom of the above
>> page. Thanks!
>>>
>>>
>>
>>
>>
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech@simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
> page.
>> Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
>
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!