[simpits-tech] ftp site...

[Marv De Beque]

They seem to vary, but 0.050" seems to be the difference between the edge of
the light plate and the back plate edge.

That is, the back plate has a porch of about 0.050" all the way around.
-- 


> From: "Biggles" <r.koopman0@chello.nl>
> Reply-To: simpits-tech@simpits.org
> Date: Tue, 18 Jun 2002 08:08:15 +0200
> To: <simpits-tech@simpits.org>
> Subject: Re: [simpits-tech] ftp site...
> 
> Then i only have to say : Good job on working out the panels.
> Was just trying to be helpfull and not correcting.
> Might even use some of the panels that you provided :)
> 
> Biggles.
> 
> (P.s. Ido you might have a good point, Is it the backplate or the front
> plate size.
> Does one know what is the know difference is about the front/backplate size?
> Mil spec wise that is.
> 
> 
> 
> ----- Original Message -----
> From: "Gwen de Lucero" <gdelucer@columbus.rr.com>
> To: <simpits-tech@simpits.org>
> Sent: Tuesday, June 18, 2002 5:51 AM
> Subject: Re: [simpits-tech] ftp site...
> 
> 
>> Biggles,
>> 
>> Yes the images are 100% actual size.  Of course you will get a slight
>> variation in size when you print depending on how accurate the printer you
>> are using is but that should be pretty much negligible.
>> 
>> ----- Original Message -----
>> From: "Biggles" <r.koopman0@chello.nl>
>> To: <simpits-tech@simpits.org>
>> Sent: Monday, June 17, 2002 11:29 PM
>> Subject: Re: [simpits-tech] ftp site...
>> 
>> 
>>> Gwen,
>>> 
>>> Just wanne add some to your input:
>>> Those files look real good.
>>> But my question is: are they the real size?
>>> I am not in the possition to find out as i am not  having a printer.
>>> I can send you some scanned front sides of some of the panels.
>>> By this you can check the ones you got with some of the panels scanned
> at
>>> real size.
>>> 
>>> I am asking this because i ran into alot of picktures that wheren't the
>> real
>>> size.
>>> Not that this is a real problem. Juist nice (need) to know.
>>> 
>>> Just trying to add some to your imput.
>>> 
>>> Biggles.
>>> 
>>> ----- Original Message -----
>>> From: "Gwen de Lucero" <gdelucer@columbus.rr.com>
>>> To: <simpits-tech@simpits.org>
>>> Sent: Monday, June 17, 2002 11:58 PM
>>> Subject: Re: [simpits-tech] ftp site...
>>> 
>>> 
>>>> Thanks again Gene.
>>>> 
>>>> I didn't realize bandwidth was that bad an issue for the site.  Sorry
> if
>>> I'm
>>>> making things tougher.
>>>> 
>>>> If you'd like I could put up 11 separate files... one for each page of
>>> panel
>>>> graphics.
>>>> 
>>>> 
>>>> ----- Original Message -----
>>>> From: "Gene Buckle" <geneb@deltasoft.com>
>>>> To: <simpits-tech@simpits.org>
>>>> Sent: Monday, June 17, 2002 5:49 PM
>>>> Subject: [simpits-tech] ftp site...
>>>> 
>>>> 
>>>>> Ok, the ftp site is back up - at least until the next script kiddie
>>> finds
>>>>> a new exploit. *sigh*
>>>>> 
>>>>> This means that Gwen's stuff is online.  If you don't have PhotoShop
>> or
>>> a
>>>>> tool to read PSD files, please don't download it.  You won't be able
>> to
>>>>> read them anyway. :)
>>>>> 
>>>>> The file is big (10+MB) and I beg that you guys don't mug my poor
>>> internet
>>>>> connection.  Go easy on me. :)
>>>>> 
>>>>> g.
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Simpits-tech mailing list
>>>>> Simpits-tech@simpits.org
>>>>> http://www.simpits.org/mailman/listinfo/simpits-tech
>>>>> To unsubscribe, please see the instructions at the bottom of the
> above
>>>> page.  Thanks!
>>>>> 
>>>> 
>>>> _______________________________________________
>>>> Simpits-tech mailing list
>>>> Simpits-tech@simpits.org
>>>> http://www.simpits.org/mailman/listinfo/simpits-tech
>>>> To unsubscribe, please see the instructions at the bottom of the above
>>> page.  Thanks!
>>>> 
>>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> Simpits-tech mailing list
>>> Simpits-tech@simpits.org
>>> http://www.simpits.org/mailman/listinfo/simpits-tech
>>> To unsubscribe, please see the instructions at the bottom of the above
>> page.  Thanks!
>>> 
>> 
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech@simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
>> 
>> 
> 
> 
> 
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!