[simpits-tech] Stepper Controller V2.1
Stig Joergensen
simpits-tech@simpits.org
Mon, 18 Feb 2002 19:21:14 +0100
Just get the board quoted - its gonna cost $100 in startup fee and then
aprox $20 per board - so it looks like im doing a photoprint instead -
on the hust for a used plotter.
But I did it again.... swapped Vss (gnd) and Vdd (plus) so here is
version 2.1
http://www.clearsky.dk/Electronics/StepControler/Schematics.gif
Http://www.clearsky.dk/Electronics/StepControler/Board.gif
Http://www.clearsky.dk/Electronics/StepControler/NetList.Txt
/Stig
P.S What a quiet weekend - what is happening?
> -----Original Message-----
> From: Gene Buckle [mailto:geneb@deltasoft.com]
> Sent: 18. februar 2002 06:14
> To: simpits-tech@simpits.org
> Subject: RE: [simpits-tech] Version 1 of the Stepper controler
>
>
> I'd make sure it works before you go to the expense of having a board
> mad.e :)
>