[simpits-tech] Epiclink Problems.. WAS: Correct list for Epic?

[Gene Buckle]

It'll talk to it, but I don't know if ralph as made a new EEPROM for the
Rev D. boards to take advantage of all the spiffy stuff that's been added
to EPL.

g.


On Sat, 13 Apr 2002, Marc Teichtahl wrote:

> Yes,
>
> I believe stuart has the ISA version. Epicenter will talk to it :-)
>
> -----Original Message-----
> From: Gene Buckle [mailto:geneb@deltasoft.com]
> Sent: 13 April 2002 18:07
> To: simpits-tech@simpits.org
> Subject: RE: [simpits-tech] Epiclink Problems.. WAS: Correct list for
> Epic?
>
>
> Wait a sec - did Peter update his EpicLink stuff to deal with the USB
> EPIC?  I think Stuart has the ISA version.
>
> g.
>
>
> On Sat, 13 Apr 2002, Marc Teichtahl wrote:
>
> > Stuart,
> >
> > 1. please migrate all your EPL to the new EPL syntax. I will send you
> > epicenter v0.1.144 in a separate email. This will force you to create
> > the correct device descriptors and epl syntax. I can help you with
> this
> > migration.you will find the new syntax to be completely different and
> > *much* more powerful with its C like syntax
> >
> > 2. test your epl on a local system
> >
> > 3. there must be a config error in the epiclink config. I wont have
> time
> > until tomorrow to look this over...
> >
> > 4. are you running wideclient on the client machine ?
> >
> > -----Original Message-----
> > From: Stuart Whelan [mailto:buffy@paradise.net.nz]
> > Sent: 13 April 2002 02:12
> > To: simpits-tech@simpits.org
> > Subject: [simpits-tech] Epiclink Problems.. WAS: Correct list for
> Epic?
> >
> >
> > Hi Marc,
> >
> > Well, I have upgraded to 2.85 of FSUPIC, and done the packet capture,
> it
> > showed two way communication taking place between the Epic machine and
> > the FS2k2 machine. Still no change to the problem though.
> >
> > I have added all the files that may be of use, including the file from
> > ethereal, into a zip file, which can be obtained from
> > http://aelfhame.net/~stuartw/epic_logs1.zip.
> >
> > Included in this zip is the EPL code I am using, very small and
> simple.
> >
> > Be aware that in this zip file the packet capture and the epicinfo
> logs
> > are not for the same time period. :)
> >
> > I have a few questions I hope you might be able to answer for me:
> >
> > 1. With EpicLink running and connected, when I look in game
> controllers
> > on my FS2k2 machine should all the joysticks show OK or Unconnected?
> > They show OK on the Epic machine, but unconnected the FS2k2 machine.
> >
> > 2. Do I need to do anything on the FS2k2 machine apart from start
> > EpicClient? I do not need to load an epl file into epic client do I?
> > Just into the epic card running epicserver?
> >
> > 3. Do I need to do anything special in my EPL code to use epiclink?
> >
> > Cheers!
> > Stuart.
> > > -----Original Message-----
> > > From: simpits-tech-admin@simpits.org
> > > [mailto:simpits-tech-admin@simpits.org] On Behalf Of Marc Teichtahl
> > > Sent: Friday, April 12, 2002 10:57 PM
> > > To: simpits-tech@simpits.org
> > > Subject: RE: [simpits-tech] Correct list for Epic?
> > >
> > >
> > > I would upgrade to the latest FSUIPC and wide client from
> > > http://www.schiratti.com/dowson.html
> > >
> > > We are up to
> > > FSUIPC 2.85
> > > Epicinfo 3.91
> > > Widefs 5.01
> > >
> > > If you want to watch your ethernet port activities down load
> > > ethereal from http://www.ethereal.com/ and install it on both
> > > PC's. This will do protocol specific capaturing for you,
> > > including IPX :)
> > >
> > > If you cant interperate the ethereal information then send me
> > > the capture file and ill look it over for you :-)
> >
> >
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> > page.  Thanks!
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
> >
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.  Thanks!
>