[simpits-tech] Epiclink Problems.. WAS: Correct list for Epic?

[Marc Teichtahl]

Yes,

I believe stuart has the ISA version. Epicenter will talk to it :-)

-----Original Message-----
From: Gene Buckle [mailto:geneb@deltasoft.com] 
Sent: 13 April 2002 18:07
To: simpits-tech@simpits.org
Subject: RE: [simpits-tech] Epiclink Problems.. WAS: Correct list for
Epic?


Wait a sec - did Peter update his EpicLink stuff to deal with the USB
EPIC?  I think Stuart has the ISA version.

g.


On Sat, 13 Apr 2002, Marc Teichtahl wrote:

> Stuart,
>
> 1. please migrate all your EPL to the new EPL syntax. I will send you
> epicenter v0.1.144 in a separate email. This will force you to create
> the correct device descriptors and epl syntax. I can help you with
this
> migration.you will find the new syntax to be completely different and
> *much* more powerful with its C like syntax
>
> 2. test your epl on a local system
>
> 3. there must be a config error in the epiclink config. I wont have
time
> until tomorrow to look this over...
>
> 4. are you running wideclient on the client machine ?
>
> -----Original Message-----
> From: Stuart Whelan [mailto:buffy@paradise.net.nz]
> Sent: 13 April 2002 02:12
> To: simpits-tech@simpits.org
> Subject: [simpits-tech] Epiclink Problems.. WAS: Correct list for
Epic?
>
>
> Hi Marc,
>
> Well, I have upgraded to 2.85 of FSUPIC, and done the packet capture,
it
> showed two way communication taking place between the Epic machine and
> the FS2k2 machine. Still no change to the problem though.
>
> I have added all the files that may be of use, including the file from
> ethereal, into a zip file, which can be obtained from
> http://aelfhame.net/~stuartw/epic_logs1.zip.
>
> Included in this zip is the EPL code I am using, very small and
simple.
>
> Be aware that in this zip file the packet capture and the epicinfo
logs
> are not for the same time period. :)
>
> I have a few questions I hope you might be able to answer for me:
>
> 1. With EpicLink running and connected, when I look in game
controllers
> on my FS2k2 machine should all the joysticks show OK or Unconnected?
> They show OK on the Epic machine, but unconnected the FS2k2 machine.
>
> 2. Do I need to do anything on the FS2k2 machine apart from start
> EpicClient? I do not need to load an epl file into epic client do I?
> Just into the epic card running epicserver?
>
> 3. Do I need to do anything special in my EPL code to use epiclink?
>
> Cheers!
> Stuart.
> > -----Original Message-----
> > From: simpits-tech-admin@simpits.org
> > [mailto:simpits-tech-admin@simpits.org] On Behalf Of Marc Teichtahl
> > Sent: Friday, April 12, 2002 10:57 PM
> > To: simpits-tech@simpits.org
> > Subject: RE: [simpits-tech] Correct list for Epic?
> >
> >
> > I would upgrade to the latest FSUIPC and wide client from
> > http://www.schiratti.com/dowson.html
> >
> > We are up to
> > FSUIPC 2.85
> > Epicinfo 3.91
> > Widefs 5.01
> >
> > If you want to watch your ethernet port activities down load
> > ethereal from http://www.ethereal.com/ and install it on both
> > PC's. This will do protocol specific capaturing for you,
> > including IPX :)
> >
> > If you cant interperate the ethereal information then send me
> > the capture file and ill look it over for you :-)
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!
>

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!