[simpits-tech] Falcon 4.0 with motion sim
Marc Teichtahl
simpits-tech@simpits.org
Fri, 12 Apr 2002 14:44:54 +0200
Have you check
- flowcontrol compatibility - hardware vs xon/xoff
- baud rates , parity and databits ?
-----Original Message-----
From: Ken Trager [mailto:kenamt@clt.bellsouth.net]
Sent: 12 April 2002 14:47
To: simpits-tech@simpits.org
Subject: [simpits-tech] Falcon 4.0 with motion sim
Volker,
Okay - I got my COMM2 port up and running and I tested it with my Palm
and I can
Hotsync to Comm 2.
I used your checklist (THANKS for that) and Iam still getting the error
message
"Can't open a serial port for MSim!" It is in a Initialization Error
Box.
What should I test next - I know the comm port can be opened!
Thanks
Ken Trager
> 1. go to the link motionsystems.de/rnr/,
> 2. go to profile
> 3. download "msim.dll"
> 4. download "alle profile gepackt" means all profiles
> 5. unzip the files
> 6. copy msim.dll to windows/system,
> reboot system
> 7. set control selector on the motherboard from the rock n ride to
"digital",
> 8. connect the seriell cable with the rock n ride"serial in" and com2
off the computer
> start the compressor and the power on
> 9. start profil "joystick.exe"
> 10. now the rock n ride must move with the joystick movements
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above
page. Thanks!