[simpits-tech] Custom Crimper Part 2

[David C. Allen]

Ok holes drilled in the Jaws and the first crimp of a MS20664C looks 
good and I was within .004" of final diameters that the part 
manufacture specifies.  While I acknowledge it not a rotary swage, it 
was also not $50 per swage that the local cable monger wanted.

Tomorrow I will get the proper drill to finish the holes for the 
MS21260 cable ends.

I added pictures of the progress to:

http://www.737flightsim.com/cut/cut.html

David
www.737FlightSim.com