[simpits-tech] FSX
frank at rezultat.dk
frank at rezultat.dk
Sun Dec 27 14:50:14 PST 2009
.... or Sol7 with TH2G > Left, Front, Right view - ??
>>From the expeimenting that I've done FSX doesn't zoom in the same way
>> that FS9 does. In FS9 you could zoom out to 0.31 which gave you about
>> 120 degrees, then by editting the saved flight you could bring the zoom
>> out to about 0.25 which gave a little more. FSX doesn't appear to show
>> the same field of view to zoom ratio.
> The only way I managed to achieve a true 180 degree view was by undocking
> and maximizing 3 separate views. With TH2GO this was very very heavy on
> processor time, so I ended up switching to a quad-SLI motherboard with 3
> 9800GT's installed. This worked fine, but ended up being unstable, with
> regular crashes to desktop. Now this was all in FS9 running XP Pro, and I
> would suspect that FSX and Vista might be a better combo....
> Hth
>
> SeanG
>
> -----Original Message-----
> From: Gene Buckle <geneb at deltasoft.com>
> Sent: Monday, 28 December 2009 09:02
> To: Simulator Cockpit Builder's List <simpits-tech at simpits.org>
> Subject: Re: [simpits-tech] FSX
>
> On Sun, 27 Dec 2009, frank at rezultat.dk wrote:
>
>> If i then setup 3 OTW (FSX in Window mode) - leftfront, front,
>> rightfront
>>
>> is this the only way to get right perspectiv ?
>>
> I think if you adjust the "zoom" you'll be on the right track. Under FSX,
> changing the "zoom level" also increases the field of view, which is
> something you need to do when running a wide TH2G display.
>
> g.
>
>
>
> --
> Proud owner of F-15C 80-0007
> http://www.f15sim.com - The only one of its kind.
>
> ScarletDME - The red hot Data Management Environment
> A Multi-Value database for the masses, not the classes.
> http://www.scarletdme.org - Get it _today_!
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
>
More information about the Simpits-tech
mailing list