[simpits-tech] final windscreen design...

[Ben Jones]

Looks good you may proceed.

8-)
regards

Ben
West Oz


----- Original Message ----- 
From: "Gene Buckle" <geneb at deltasoft.com>
To: <simpits-tech at simpits.org>
Sent: Sunday, November 30, 2008 12:21 AM
Subject: [simpits-tech] final windscreen design...


>
> Ok gang, I need a yea or nay on this windscreen layout.
>
> Here's a rendering if it on the cockpit frame:
> http://www.geneb.org/pitkit/windscreen_test/windscreen_whole.png
>
> Here are two different views of the windscreen frame all by itself:
> http://www.geneb.org/pitkit/windscreen_test/windscreen_alone_1.png
> http://www.geneb.org/pitkit/windscreen_test/windscreen_alone_2.png
>
> This is similar to the one I posted previously, but the "fit" to the
> cockpit shell is much better.  The top solid part can have a small cutout
> in it or not - the part is 6" by 14".
>
> There is no "face" frame on the windscreen as I think it would interfere
> too much with the forward view of the screen.
>
> The area forward of the windscreen would be a flat deck that could be used
> to support a standard monitor or an "in your face" mounted rear projection
> screen.
>
> I need to know if you guys (and gal?) spot any fatal errors in this
> assembly.  It WILL require you have a table saw to build.  There are
> multiple 25 degree and 100 degree cuts that need to be made in order to
> make things fit properly.
>
> Don't be shy - I need to know of any problems before any of these are in
> the field.
>
> Thanks all!
>
> g.
>
>
> -- 
> Proud owner of F-15C 80-0007
> http://www.f15sim.com - The only one of its kind.
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above 
> page.  Thanks!
>