[simpits-tech] FSX
Frank Riedel
frank at rezultat.dk
Mon Jul 14 00:53:09 PDT 2008
Thx Ido
Board is that a motherboard??
/Frank
_____
Fra: simpits-tech-bounces at simpits.org
[mailto:simpits-tech-bounces at simpits.org] På vegne af Ido Dekkers
Sendt: 14. juli 2008 09:33
Til: Simulator Cockpit tech list
Emne: Re: [simpits-tech] FSX
Oh and ofcourse you need a compatible board
On Mon, Jul 14, 2008 at 10:32 AM, Ido Dekkers <idekkers at gmail.com> wrote:
a single quad core should be enough,
and probably 4GB of RAM
the problem with graphics is the display card/s you would probably need at
least 2 high end card in SLI/Crossfire
you'll have to get either 2 Nvidia 9800 or even better 2 Nvidia 280, or if
you really swim in money - 3 of them
or if you prefer the alternative - get the new ATI/AMD 4870 and if which
cost about half or even less but loose only a bit in speed,
these also come in 2 or 3 card configuration.
or you can wait for the 4870X2 with 2 GPU's on each card - that should be
out by august, and still cost a lot less them the NV280 but run faster.
you can read about it here :
http://www.tomshardware.com/reviews/radeon-hd-4870,1964.html
the only problem is that for both new card - the 4870 and 260/280 the
drivers for FSX are not mature yet
Ido
On Mon, Jul 14, 2008 at 10:14 AM, Frank Riedel <frank at rezultat.dk> wrote:
Hi All
Yea i know
this has been discussed a lot of times
But
. To be able to run FSX with full detail and other slider all the way to
the right
What hardware will be the ultimate solution
. A dual QUAD processor and 8
GBRAM
If yes
what graphic card then ???
Other suggestions ??
Regards
Frank
_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20080714/ef610812/attachment-0001.html
More information about the Simpits-tech
mailing list