[simpits-tech] Cessna 182 Project

[delor lauchang]

hi frank,
i run my f4af on three 512 radeon pro crossfire, pci-e 16x. i use the f4
glass instrument gauges from eagle 9 flight systems.

you will find that f4glass will give you the gauges of the right panel, and
the radar of the left panel. these gauges are distributed on my right lower
22"monitor. the gauges for the attitude and  the  other  center lower
console gauges between your legs, are distributed  on my lower center
console on my  12"  monitor .

the two mfd's , i distribute on my 22" monitor together with the
hud.including scenery.

you must start the f4glass before you start the f4af, so they will
synchronize. dual core cpu helps a lot in optimizing the frame rate.  track
ir  will give you speedy access  to your field of views.  plus i use two
keyboards  to work  the distribution  of the  instrument  functions  on left
and right panels,  you will  find keyboard guide on  f4af  website, under
downloadables.

my throttle and stick are saitek x45, and i use the pedals from ch products,
all are digital. the other 22" on my upper right i use for referencing, like
an idiot board. my extreme left lower monitor  is for my windows and for
other support  pages.

just like i said, soon i will be running my simulator on a 32", a 42", a12"

hope this helps...

delor
On Sat, Jul 12, 2008 at 7:02 PM, Frank Riedel <frank at rezultat.dk> wrote:

>  Please Delor
>
> Explain how your Falcon setup is and how you run it !
>
> Frank
>
>
>  ------------------------------
>
> *Fra:* simpits-tech-bounces at simpits.org [mailto:simpits-tech-bounces at sim
> pits.org] *På vegne af *delor lauchang
> *Sendt:* 13. juli 2008 00:09
> *Til:* Simulator Cockpit tech list
> *Emne:* Re: [simpits-tech] Cessna 182 Project
>
>
>
> if you use ati radeon graphics cards, catalyst can force the issue of wider
> range resolution without straining the monitor, if what you got is a tv
> thats pc compatible.
>
> on xplane try 16:9 and adjust your resoltion thru catalyst, if youre using
> ati radeon video cards, iam using three 512 dual display radeon pro.
>
> even with falcon 4.0 af, with the panel software, it works good.
>
> On Sat, Jul 12, 2008 at 4:16 PM, William Segal <catalina299 at gmail.com>
> wrote:
>
> I have a friend with small store that sells TV's to apartment house&hotels
> he let me test a 52" LCD TV `1980x``1080 raw resolution but the issue is at
> least in X-plane there is no resolution of that
>
> type its basically 4:3 or 16:9 so even though you think your getting that
> big resolution the best you can get is  or similar to 1280x720 which on that
> large a screen can be
>
> not as nice a picture as I can get on cheap 19" LCD's which give you
> 1280x1024  the only advantage the big screen has is there are no cockpit
> lines and the front window
>
> view can be clear one piece
>
> regards
>
>
>
> Bill
>
>
>
>
>
>
>
>
>
> On Sat, Jul 12, 2008 at 7:26 AM, delor lauchang <echotech1452 at gmail.com>
> wrote:
>
> thats true,but bigger monitors are becoming cheaper, so i might opt to go
> for the big widescreen and stretch my field of view, might end up using a 32
> or 37 for my instrument panels and 42 to 50 for the scenery.plus on top of
> that, newer software are coming out from simmers who are programmers, and we
> have lots of new gauges that are working based on how you want to configure
> them.
>
> On Mon, Jul 7, 2008 at 8:27 AM, William Segal <catalina299 at gmail.com>
> wrote:
>
>
> I can't help you but I will be following your progress. One I thing know
> Matrox is coming out with a single card that will support 4 monitors at up
> to 1600x1200 most likely in XP.
>
> &MSFS
>
>
>
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
>
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20080713/bda2fe90/attachment-0001.html